00 Freak
05-07-2007, 08:06 PM
Well I have a set of used Patriot stage 3 ls6 style heads part #2015. I just bought these from another member not to long ago. One of them is still wrapped up. But decided that I'm going a different route. SOLD
http://i73.photobucket.com/albums/i...yessi/pats1.jpg
http://i73.photobucket.com/albums/i...yessi/pats4.jpg
http://i73.photobucket.com/albums/i...yessi/pats3.jpg
http://i73.photobucket.com/albums/i...yessi/pats2.jpg
Also have set of Stage II Jantzer ported heads.
The heads have stock LS6, with hollow stem valves and sodium filled on the exaust side.
The heads flow 296@.570 according to Jantzer. They have Comp cam 918 springs/titanium retainers, with stock gm seals & locks. They are GM 241 casting centerbolt heads (the best ones). They were milled .035". I had this with a TR224 and performed real well with this setup. Look at my best time in the sig. SOLD
http://i73.photobucket.com/albums/i...essi/heads1.jpg
http://i73.photobucket.com/albums/i...i/pushrods1.jpg
Valvetrain pics-
http://i73.photobucket.com/albums/i.../valvetrain.jpg
Tomorrow I'm going to drain the fluid out of my rear and take off the T/A cover. The rear end has a broken Diff and don't know if the 3.73gears are good but post up if they are. Selling the whole rear for SOLD.
used Hooker ORY-$150+shipping OBO
SLP air lid $75+shipping
stock lifters w/ 42Kmi. SOLD
stock rockers- $50+shipping OBO
stock '01 camaro SS front and rear shock springs- $50+shipping OBO
stock SS grille-$10+shipping
lower air intake w/ free air mode and w/ clips-$10+shipping
stock oil pump-$35+shipping.
16in maro salad shooters w/ MT ET streets w/ about 7 passes on them. Still has a lot of tread. $300+shipping
1-speedline 02 ws6 wheel-$40+shipping
Any questions please PM me. Thanks
http://i73.photobucket.com/albums/i...yessi/pats1.jpg
http://i73.photobucket.com/albums/i...yessi/pats4.jpg
http://i73.photobucket.com/albums/i...yessi/pats3.jpg
http://i73.photobucket.com/albums/i...yessi/pats2.jpg
Also have set of Stage II Jantzer ported heads.
The heads have stock LS6, with hollow stem valves and sodium filled on the exaust side.
The heads flow 296@.570 according to Jantzer. They have Comp cam 918 springs/titanium retainers, with stock gm seals & locks. They are GM 241 casting centerbolt heads (the best ones). They were milled .035". I had this with a TR224 and performed real well with this setup. Look at my best time in the sig. SOLD
http://i73.photobucket.com/albums/i...essi/heads1.jpg
http://i73.photobucket.com/albums/i...i/pushrods1.jpg
Valvetrain pics-
http://i73.photobucket.com/albums/i.../valvetrain.jpg
Tomorrow I'm going to drain the fluid out of my rear and take off the T/A cover. The rear end has a broken Diff and don't know if the 3.73gears are good but post up if they are. Selling the whole rear for SOLD.
used Hooker ORY-$150+shipping OBO
SLP air lid $75+shipping
stock lifters w/ 42Kmi. SOLD
stock rockers- $50+shipping OBO
stock '01 camaro SS front and rear shock springs- $50+shipping OBO
stock SS grille-$10+shipping
lower air intake w/ free air mode and w/ clips-$10+shipping
stock oil pump-$35+shipping.
16in maro salad shooters w/ MT ET streets w/ about 7 passes on them. Still has a lot of tread. $300+shipping
1-speedline 02 ws6 wheel-$40+shipping
Any questions please PM me. Thanks