Weber Racing Equipment FI Sale. Shortblocks, Precision Turbo, and Acceleronics
05-10-2007, 11:26 AM
#1
Banned
Thread Starter
iTrader: (4)
Join Date: Jan 2007
Location: North Ridgeville, Ohio
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
Weber Racing Equipment FI Sale. Shortblocks, Precision Turbo, and Acceleronics I know we are new here, so I will give you guys a little background. We are Weber Racing Equipment. Weber Racing was established in 1968, giving us over 35 years of engine building and racing experience.
The Weber Racing Equipment Dragster consists of a 465 CI Allen Johnson Block and Heads (Based on a BBC), that spins over 10,000 RPM, 60 pounds of boost is delivered via a PSI Twin Screw
All 2500+ HP is rowed through a Lenko 3 Speed!!!!! Oh yea..........it runs 5.50 @ 255 MPH 
We have been one of the premier engine builders for some of the worlds fastest Turbo Buick V6's for many years. We even pioneered the Billet Hyd. Roller cam for Buick's and are the only company that sells hydraulic rollers that do not require engine block modification for installation. If you would like, please feel free to do a search on Turbobuick.com (or any other buick V6 message board you can think of) to see the reviews we have received in the Buick community.
WRE 370 CI Stage 1 Short Block : $2850
New 6.0L GM Iron Block
Polished GM 6.0L Crankshaft
K1 Technologies 4340 H-Beam Connecting Rods (K1 is a subsidiary of Carrillo)
Wiseco -25CC Turbo Duty Pistons w/ Wiseco std. tension rings
Coated Durabond Cam, Main and Rod Bearings
Engine will be:
Even though these are new blocks, we have seen many imperfections. Especially in the deck, not giving a perfect head mating surface. We have seen factory blocks off by as much as .009. This makes the square deck and line hone crucial to component functionality and longevity.
WRE 408 CI Stage 1 Short Block : $3450
Same features at the 370 CI engine listed above with the exception of:
K1 Technologies 4340 Forged 4.000 Stroker crankshaft
Wiseco -32cc Stroker Turbo Duty pistons
Both engine packages can be tailored to fit your needs please inquire with any questions you may have.
We are also extending this sale to all engine upgrades:
Weber Racing Equipment is also an authorized dealer Acceleronics impedance converter boxes.
For those of you not familiar on what an impedance converter does. It is simply a box that splices in your wiring harness between your injectors and your engine computer. This gives you the ability to run the big, low impedance injectors on your factory computer and eliminates the need for expensive stand alone engine controllers.
We are offering the Acceleronics Boxes at a sale price of $375. This includes shipping anywhere in the continental united states.
We are also offering discounted pricing on all Precision Turbo and Engine products. Anything from injectors, wastegates, to big thumpers it is all on sale.
For special pricing, custom work or any questions you may have please post it up, shoot a PM, Send an email or give us a call at 440-327-7702.
The Weber Racing Equipment Dragster consists of a 465 CI Allen Johnson Block and Heads (Based on a BBC), that spins over 10,000 RPM, 60 pounds of boost is delivered via a PSI Twin Screw
All 2500+ HP is rowed through a Lenko 3 Speed!!!!! Oh yea..........it runs 5.50 @ 255 MPH We have been one of the premier engine builders for some of the worlds fastest Turbo Buick V6's for many years. We even pioneered the Billet Hyd. Roller cam for Buick's and are the only company that sells hydraulic rollers that do not require engine block modification for installation. If you would like, please feel free to do a search on Turbobuick.com (or any other buick V6 message board you can think of) to see the reviews we have received in the Buick community.
WRE 370 CI Stage 1 Short Block : $2850
New 6.0L GM Iron Block
Polished GM 6.0L Crankshaft
K1 Technologies 4340 H-Beam Connecting Rods (K1 is a subsidiary of Carrillo)
Wiseco -25CC Turbo Duty Pistons w/ Wiseco std. tension rings
Coated Durabond Cam, Main and Rod Bearings
Engine will be:
- CNC Bored and Honed with torque plate for a precision ring finish
- Align honed
- CNC Square Decked
- All main caps deburred
- Jet washed prior to assembly
- Blueprinted and Balanced (Tolerance sheet provided with every engine we
assemble) - Assembled in our clean, dedicated, engine assembly room.
Even though these are new blocks, we have seen many imperfections. Especially in the deck, not giving a perfect head mating surface. We have seen factory blocks off by as much as .009. This makes the square deck and line hone crucial to component functionality and longevity.
WRE 408 CI Stage 1 Short Block : $3450
Same features at the 370 CI engine listed above with the exception of:
K1 Technologies 4340 Forged 4.000 Stroker crankshaft
Wiseco -32cc Stroker Turbo Duty pistons
Both engine packages can be tailored to fit your needs please inquire with any questions you may have.
We are also extending this sale to all engine upgrades:
- ARP Main and head studs
- Piston Coating
- Custom pistons
- Pin upgrades
- Upgraded crankshafts by Callies
- LS2 Aluminum Block upgrade
- Cylinder head O-Ringing is available
- Main Cap Dowels also available
- Special pricing on all gasket kits, valve train and cylinder heads.
Weber Racing Equipment is also an authorized dealer Acceleronics impedance converter boxes.
For those of you not familiar on what an impedance converter does. It is simply a box that splices in your wiring harness between your injectors and your engine computer. This gives you the ability to run the big, low impedance injectors on your factory computer and eliminates the need for expensive stand alone engine controllers.
We are offering the Acceleronics Boxes at a sale price of $375. This includes shipping anywhere in the continental united states.
We are also offering discounted pricing on all Precision Turbo and Engine products. Anything from injectors, wastegates, to big thumpers it is all on sale.
For special pricing, custom work or any questions you may have please post it up, shoot a PM, Send an email or give us a call at 440-327-7702.
For those who need engine or any other accessory installed we do offer full installation and tuning services!!!!
Last edited by WeberRacingEquipment; 05-10-2007 at 01:38 PM.
05-10-2007, 12:05 PM
#4
Banned
Thread Starter
iTrader: (4)
Join Date: Jan 2007
Location: North Ridgeville, Ohio
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Silver 00 SS
Can i drive your Top Alchohol Dragster???? 
Are you sure you can handle 60's of .907 and 1/8 mi. times of 3.59 @ 212 MPH???
05-10-2007, 01:27 PM
#7
Banned
Thread Starter
iTrader: (4)
Join Date: Jan 2007
Location: North Ridgeville, Ohio
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by erikthegoalie
if u guys had to put a horsepower rating on the 370 block, what would u say it could handle all day long?
No matter how strong an engine is built, the longevity of the engine has alot of factors. Some of these are tune, fuel and driver.
Trending Topics
05-10-2007, 02:40 PM
#11
Banned
Thread Starter
iTrader: (4)
Join Date: Jan 2007
Location: North Ridgeville, Ohio
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by redrumss
When you say Turbocharger only what does that mean? I want one for a Supercharger.
05-10-2007, 02:53 PM
#13
Banned
Thread Starter
iTrader: (4)
Join Date: Jan 2007
Location: North Ridgeville, Ohio
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Retail Value
Those are some serious prices! Top notch components too... Definitely will be keeping a close eye on those short blocks for my new project..
05-10-2007, 03:18 PM
#15
Banned
Thread Starter
iTrader: (4)
Join Date: Jan 2007
Location: North Ridgeville, Ohio
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by redrumss
Are these introductory prices and do you offer a Military discount for us protectors?
Shoot me a PM and let me know on what you are looking to get into.
05-10-2007, 04:00 PM
#17
Banned
Thread Starter
iTrader: (4)
Join Date: Jan 2007
Location: North Ridgeville, Ohio
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by redrumss
PM sent,, Maybe I will get a shortblock before come home from the sandbox. 
PM Returned. Keeps the pm's and emails coming everyone!!
05-10-2007, 05:54 PM
#19
LS1TECH Sponsor
Join Date: May 2006
Posts: 625
Likes: 0
Received 0 Likes
on
0 Posts
Thats a really good price brian. Hmm...might have to take this offer up sense one of my customers needs a engine for his rx7 ls1 swap. Should be a pretty bad *** car with a ls1 and a turbo kit that I have to build for it.
05-10-2007, 07:23 PM
#20
12 Second Club
iTrader: (7)
Join Date: Nov 2003
Location: Naperville, IL
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WeberRacingEquipment
Sure.... there will be a rather large deposit that you can recieve only after the car is pulled back into the pits in proper condition and some waivers will need to be filled out
Are you sure you can handle 60's of .907 and 1/8 mi. times of 3.59 @ 212 MPH???
Are you sure you can handle 60's of .907 and 1/8 mi. times of 3.59 @ 212 MPH???
but i am working on winning the lotto haha 
