LS7 pushrod length?
#1
On The Tree
Thread Starter
Join Date: Jan 2002
Location: Aloha, Oregon
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
LS7 pushrod length?
I have searched and searched here but cannot find the answer. Does anyone know the stock LS7 lifter pushrod length? I've been told 7.800" but just want to be sure.
Robert
Robert
#2
TECH Enthusiast
iTrader: (12)
LS7 Pushrod Length
The LS7 has 7.75" pushrods that are about 3/8" in diameter. This is useful as a starting point, but only if you're running a cam with the same base circle, head and head gasket configuration and your block is standard height.
Measure with a Comp Pushrod length tool to be sure!
Measure with a Comp Pushrod length tool to be sure!
#3
On The Tree
Thread Starter
Join Date: Jan 2002
Location: Aloha, Oregon
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by scatillac
Measure with a Comp Pushrod length tool to be sure!
Robert