F/S: Cheap 408 shortblock & AFR 225's
#1
F/S: Cheap 408 shortblock & AFR 225's
Selling an ironblock 408 shortblock made by Racetech out of Alabama.
Specs are:
4 in Eagle crank
6.125 ealge rods
4.030 Diamond Flattop Pistons with -2cc vavle releifs
ALL ARP bolts (rods and main)
Shortblock is out and available for veiwing if you want to see it. Absolutely nothing wrong with it. It has around 4K miles on it. Reason for selling going to try another setup.
Options:
$2700 picked up or meet half way in South Texas
$2850 shipped anywhere else in Texas
$2900 shipped anywhere in the U.S.
AFR 225 small bore with upgraded #8019 springs for up to .650 lift, only used during the weekends with 1500 miles
Options:
$1700 picked up or meet half way in South Texas
$1775 shipped anywhere else in Texas
$1800 shipped anywhere in U.S.
The heads are on the car but upon receiving payment, will remove imediately.
Leave e-mail address for pics of shortblock................
Specs are:
4 in Eagle crank
6.125 ealge rods
4.030 Diamond Flattop Pistons with -2cc vavle releifs
ALL ARP bolts (rods and main)
Shortblock is out and available for veiwing if you want to see it. Absolutely nothing wrong with it. It has around 4K miles on it. Reason for selling going to try another setup.
Options:
$2700 picked up or meet half way in South Texas
$2850 shipped anywhere else in Texas
$2900 shipped anywhere in the U.S.
AFR 225 small bore with upgraded #8019 springs for up to .650 lift, only used during the weekends with 1500 miles
Options:
$1700 picked up or meet half way in South Texas
$1775 shipped anywhere else in Texas
$1800 shipped anywhere in U.S.
The heads are on the car but upon receiving payment, will remove imediately.
Leave e-mail address for pics of shortblock................
Last edited by Dmoney; 05-25-2007 at 09:21 AM. Reason: price change
#5
Let me make something clear. The AFR small bore heads were not on the 408. The heads are on my 402. The 408 was on an 02 T/A M6 that made 545rwhp & 511rwt. These items are going to make power. How much depends on how you set it up.....
Also, I will discount the prices if bought in TEXAS...........
Also, I will discount the prices if bought in TEXAS...........