F/S Ls1 Shortblock and more...
05-19-2007, 11:44 AM
#1
Teching In
Thread Starter
iTrader: (8)
Join Date: Nov 2006
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
F/S Ls1 Shortblock and more... Selling some of the stuff that i dont need anymore, Im in Lewisville, Tx and willing to ship the little stuff but the blocks are pick up only..All Prices are OBO. Pictures available just ask
2000 Corvette Short block. New rings, and bearings, 0 miles
SOLD!!
stock ls1 heads 100k on the miles,with comp 918's
the springs only have about 3k on them
$250
Stock Set of 243's 2500 miles, with stock "yellow" ls6 springs
$475
Stock ls1 intake, already has the egr closed up
$50
Stock ls1 injectors set of 8
$20
LS1 center bolt valve covers, one painted SSO and One painted black, were like that when i got them, just need to be sanded. I can sandblast them for $20 extra
$50
LS1 Valley cover
$40
Front and rear covers
$50 for both of them
Stock Crank Pulley
$30
Corvette Oil pan with windage tray, New pick up tube, new bolts, and new gasket
$100
1999 Bare LS1 block, block only no rotating assembly, needs 1 sleeve
$200
I have another shortblock its a 69-79 corvette block
350 with a .040 over bore
and 3.75" stroke Forged Scat crank = 385 C.I.
4 Bolt mains
Corvette Rods
Keith Black Hyperutectic Pistons pt# kb135
Fresh rings, and bearings
0 miles
$850
2000 Corvette Short block. New rings, and bearings, 0 miles
SOLD!!
stock ls1 heads 100k on the miles,with comp 918's
the springs only have about 3k on them
$250
Stock Set of 243's 2500 miles, with stock "yellow" ls6 springs
$475
Stock ls1 intake, already has the egr closed up
$50
Stock ls1 injectors set of 8
$20
LS1 center bolt valve covers, one painted SSO and One painted black, were like that when i got them, just need to be sanded. I can sandblast them for $20 extra
$50
LS1 Valley cover
$40
Front and rear covers
$50 for both of them
Stock Crank Pulley
$30
Corvette Oil pan with windage tray, New pick up tube, new bolts, and new gasket
$100
1999 Bare LS1 block, block only no rotating assembly, needs 1 sleeve
$200
I have another shortblock its a 69-79 corvette block
350 with a .040 over bore
and 3.75" stroke Forged Scat crank = 385 C.I.
4 Bolt mains
Corvette Rods
Keith Black Hyperutectic Pistons pt# kb135
Fresh rings, and bearings
0 miles
$850
Last edited by Lightft01; 05-21-2007 at 11:26 AM.
05-19-2007, 08:33 PM
#2
Hey Bud im willing to talk to u about buying your shortblock I live in Fort Worth if u could give me a call at (682) 597-7287 I have a few questions for ya but I will even be willing to come pick the shortblock up myself!
05-20-2007, 05:38 PM
#5
Teching In
Thread Starter
iTrader: (8)
Join Date: Nov 2006
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Sorry meant a 400 crank, which is a 3.75" stroke with a .040 bore is a 384.5 ci, Im at main and old orchard in lewisville. The other way i guess it would have been like a 410 ci sb, ha ha.
Originally Posted by Pwebbz28
I think you may need to go back and double check your numbers on the smallblock. 4.040 bore and 4.00 stroke is not 385CI. I may be wrong but i didnt think there was a 4" stroke for a SBC. Where are you located in lewisville?
