stealth71

iTrader: (15)

Well I guess the last time I put the motor away all the cylinders didn't get lubed properly. Now there it some light rust on 2 of the cylinder walls.

What should I do? Not worry about it or the other extreme, pull the motor apart and have it honed, possibly bored and new pistons? Any other ides?

I just don't want to loose the motor over it and waste all the money in cam, oil pump.....





The others look fine:

Grimes

iTrader: (3)

i would try an oily scotchbrite pad, lightly work the area, and see if you can get it to were you don't feel the rust anymore.

dnm12

iTrader: (13)

what about carb cleaner and your fingers?

MorePowerPlease

I agree see if you can get it to the point where u don't feel anything.

How long has the engine been sitting. Seems like there is alot of rust in other places. Use a gaint trash bag to cover and cut air off when storing.