General Maintenance & Repairs Leaks | Squeaks | Clunks | Rattles | Grinds

popping water pump gaskets

Thread Tools
 
Search this Thread
 
Old 05-27-2007, 09:44 PM
  #1  
Teching In
Thread Starter
 
BayLsx's Avatar
 
Join Date: May 2007
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default popping water pump gaskets

after putting in a 160 thermostat. my motor runs colder about 180*.

The water pump gaskets are popping. like there is too much pressure in the system.

what would be a resolution to this problem?
do i have to run the stock therm?

the coolant line under the throttle body is blocked off.

2001 ls1 in 90 rx7.
Old 05-27-2007, 09:48 PM
  #2  
Launching!
 
35thUCF's Avatar
 
Join Date: Aug 2005
Location: East Central Florida
Posts: 211
Likes: 0
Received 1 Like on 1 Post
Default

make sure the O ring is seated all the way around when you tighten it down, thats my best guess
Old 05-29-2007, 11:20 PM
  #3  
TECH Senior Member
iTrader: (6)
 
WILWAXU's Avatar
 
Join Date: Nov 2001
Location: League City, TX
Posts: 14,378
Likes: 0
Received 1 Like on 1 Post

Default

Sounds like a stuck thermostat.. just never seen one act that way.
Old 05-31-2007, 02:10 AM
  #4  
Teching In
Thread Starter
 
BayLsx's Avatar
 
Join Date: May 2007
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

that was my second guess. but i have open the stat by hand. either that ill just send it back.




All times are GMT -5. The time now is 11:47 PM.