most cost effective stroker motor with a aluminum block?
05-29-2007, 12:31 PM
#1
Staging Lane
Thread Starter
Join Date: Jul 2004
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
most cost effective stroker motor with a aluminum block? my car needs a new short block, how much bore can i use on the stock heads? i want to do this as cost effective as possible without adding the weight of a iron block
what are my options?
what are my options?
05-29-2007, 12:34 PM
#2
TECH Senior Member
iTrader: (18)
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes
on
0 Posts
You cat really bore the LS1/2 blocks much, but you can go with a 4 inch stroke to make it a 383. If you already own the aluminum block cant get much cheaper than that.
05-30-2007, 08:39 AM
#7
https://ls1tech.com/forums/generation-iv-internal-engine/722819-ls7-427-special-sdpc.html
If you act now, you can get into this 427 CHEAP!!!
If you act now, you can get into this 427 CHEAP!!!
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
Trending Topics
05-30-2007, 08:48 AM
#9
You need that, Mike!!
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
You makin donations to my make a wish list??