Bigdog's Wagon
06-07-2007, 02:13 PM
#4
Teching In
Thread Starter
Join Date: May 2006
Location: Mesa,Az
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Had to cut and box-in the front cross member, cut down the trans dap mounts because they ran into the ac pump and make spacers to lift the engine up a little. Weld a longer bracket forward on the tranny cross bar. I also want to thank all you guy's, Spalding Auto in Washington and John at Spear Tech.
Trending Topics
06-11-2007, 09:23 AM
#9
Teching In
Thread Starter
Join Date: May 2006
Location: Mesa,Az
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Cool air Yes one of my plans is to extend the tube over to the right side and out to the front. The bigamus boat has a 2.77 I've been having fun embear assing some suv's and rice burners. You have to know when to hold them and fold them.
06-12-2007, 09:57 AM
#11
Teching In
Thread Starter
Join Date: May 2006
Location: Mesa,Az
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
AC ran into the cross member. Had to spacer the engine up about and 1.125. Truck oil pan had about a .5 clearance when done. Had to cut flanges off of the exhaust manifolds and turn them to clear the side frame rails.
06-13-2007, 12:16 AM
#12
TECH Enthusiast
iTrader: (4)
Join Date: Aug 2003
Location: Phoenix AZ
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mesa
Well five months later and one caprice classic wagon and one 2003 5.3 vortec. It's finally done and I just love it. What a sleeper.
Nice work.
Take that thing down to firebird and post some timeslips.
