Rokn Red

Had Pacesetter ORY-headers installed and tune with eLive on my 02 M6 WS6. Two days ago started throwing P0135 (bank 1 front sensor), but off and on. Today no code, but after work started real sluggish and then had to give it gas to keep it going. Got her to idle at 200 and made it's way to 700-800, but would go back down then up when clutch was in (didn't stall)

Weather is 85 with 70-80 humidity (humidityjust moved in Monday night) in Florida ; filled up with BP (Amoco) premium yesterday.

Any ideas, tune bad or?

ZL1Killa

iTrader: (17)

how long had it been tuned with that tune? who does your tuning? and just get them to re-do what they have, as its not working.

when someone does a tune, if they take the time to do it right the first time; you won't have any of these problems. That is IF it is the TUNE. otherwise it could be a loose sensor/connection or somebody has broke something.

get the tune re-done for free, as it should work fine. then start chasing wires

Rokn Red

It was about a month or so ago by XXX Motorsports with a 4 dynos. what I'm worried is the idling thing. It was fine driving to work and then start it up thsi afternoon after work and damn near couldn't get her to go not alone idle. The humidity really cranked up this week to 70-80%, but I bet BP (Amoco) sold me some crap premium.

I'm calling the guy back, he's good people, I thought I'd explore all ideas first.

slow

iTrader: (7)

P135 is a circuit heater code, and sounds like a problem with the o2 sensor, or wiring.

Ryan

Eurospec2

iTrader: (2)

sounds like your 02 sensor is bad, not your tune