Fueling & Injection - LT1 -LS1 fuel system change over...

Alright, its finally time to tackle the fuel system in my car. Here is the deal. I'm puting a H/C/N20 6.0 liter into my 95 TA. I've thought about switching the tank and all the lines to make it a plug an play fuel system. Then you have to worry about the wiring and then the gauge accuracy.

I am leaning towards using the Vette filter/regulator. What I want to know is what lines m I going to need to go from the LT1 tank lines to adapt to the filter/regulator? Also, what do I do about fittings coming off the filter/regulator and going to the fuel rail of the LS6 intake?

Anyone who has done this, please chime in. I want to make this as painless as possible. Even if its directing me to someone or a sponser than would be able to help me.

Thanks in advance guys. This is tha last piece of the puzzle for this project.

:drive:

I'm doing the same thing only in a Camaro, I will swap in a 98 tank and use the short return style regulator thats in the tank. Seems easier/simple (plus I have the lines/line from a 98) I parted out last year. I'm thinking its just a wiring issue from there on out...

You can leave it all intact and add the reg up front to the rails stock lines and all. give me a call I will set you up with what you need.

Nate

You can leave it all intact and add the reg up front to the rails stock lines and all. give me a call I will set you up with what you need.

Nate

Thanks Nate! I've been well taken care of.