ls1CANTU

iTrader: (9)

would like to know if there is any c6 vetts auto in the 11's with all bolt ons and cam only. also if any body is in the 11's what cam did you all go with and what bolt ons, would like to get it in to the mid to low 11's with out doing any head work.

BigRon77

iTrader: (1)

Which auto, 6spd or 4?

I know a cam only A4 that went 11.8/116. (Cam, headers, exhaust, cai, DRs). 6spd would be a little quicker. It was a 224/228 114 grind. I had that same cam in my car for a while...with CAI, headers, etc., the cam picked up 36rwhp by itself (had headers/cai/catback then changed nothing but cam/tune).

It was tolerable without a converter...pushed at the brakes just a bit, but easily drivable. Converter gets you mid-11s.

You could drop in a 228/232 or similar grind...the G5X3 LG cam is popular, add a converter with bolt-ons and be mid-11s on DRs easy.

Probably put down about 420rwhp.

Jersey_TA

iTrader: (1)

If you don't get into the 11s with bolt ons in an auto C6 there is something wrong. My buddy(LS1LT1) on here went 12.2 in his Stock C6
LS1LT1....1.917.....7.953 @ 91.08.......12.215 @ 115.45........LS2(stock C6)

He ran this at atco raceway in good air last year.

Frosty

iTrader: (17)

What he said.

00turboT/A

iTrader: (61)

I had a customer of mine go 11.44 at 123 in a 6 speed cam only car. The car made 423RWHP and 401RWTQ. Also the car is a 07 vette.

atomicfusion

You should definately be there with bolt ons and a Cam. If not go to driving school.

SY732

Lots of bolton cars in the 11's but there are 2 cam onlys on this list

BOLTONS
11.62 @ 117.48 - Dennis50NJ - 05 Z51 A4 - CAI, catback, headers, converter, tuning, DR (faster numbers soon)
11.76 @ 117.00 - NastyC6 -05 Z51 A4 - CAI, converter, gears, headers, tune
11.81 @ 118.76 - Joe G - 05 Z51 M6 - CAI, headers, 3.90s, ported intake,tune
11.87 @ 112.99 - Cucchiara - 05 A4 - CAI, catback, headers, converter, tune, DR's
11.94 @ 117.99 - JimSpeed - 06 Z51 M6 - CAI, catback, headers

CAM ONLY
11.49 @ 125.62 - Wa$nt me - 06 Z51 M6 - CAI, cam, catback, headers, intake, pullies, tune
11.98 @ 120.87 - Mr Z51 - 06 Z51 M6 - CAI, Cam, gears, headers, ported intake, UD pullies, DR

Very close: Boltons
12.01 @ 116.00 - Mr Z51 - 06 Z51 M6 - CAI, catback, headers, ported intake, tune, DR
12.03 @ 118.50 - Serendipity - 06 M6 - CAI, catback, headers
12.04 @ 114.01 - 06C6FVR - 06 Z51 M6 - Mufflers, tune, DR
12.05 @ 117.02 - CYA Vett - 05 F55 M6 - headers
12.08 @ 117.00 - Forrest -06 Z51 M6 - CAI, catback, headers, Tune, DR
Cam
12.05 @ 119.18 - Evilways -06 Z51 A6 - Cam, headers, tune

And if you care there are a few stock C6's with 100-125 shots in the mid-high 11's some even with stock runflat tires.

Undecided

iTrader: (1)

I went 11.91 @ 120 in the TX heat on the factory radials. I've got Kooks headers, MTI CAI, tuning, & a custom grind from MTI. 591/601 230/236 @115 lsa. Car made 427 rwhp 398 rwtq. BTW 07 Z51 6spd man.

Jeenis

ive done 11.73 on CAI, tune, DRs. no cam yet. it's C6 Z06, so i know it's a bit different from straight C6.

robz*

iTrader: (1)

Not exactly what you asked but I have many runs in the 10.9x's with a CAM ONLY 05Z with stock weight/suspension/bottom end.