92slowmaro

iTrader: (22)

just like the title says...

i just bought a set of oem 243's bare heads. i have a set of patriot golds(.650) to put on them and i need a set of valves.. should i go with 02 + stockers for the lighter weight? or should i go with an after market valve and have a valve job done say 3 or 5 angle?

thanks,
ryan

Formulated

iTrader: (16)

I would like to know people's opinion as well. I'm putting together bare 243's. I intended on taking the hardware from a new set of 241's I have, but after seeing that I replace most of it for going to dual springs, I figure I might as well spring for the new valves and keep my 241's together. I've been looking at the Manley valves, but I've heard Ferreas are nice too.

92slowmaro

iTrader: (22)

come on someone has to know...

TheLS1Kid

iTrader: (12)

I'd go with the Patriot 2.02"/1.57" stainless steel valves with a valve job like you said.