Best cam to fit my application???
06-20-2007, 11:04 AM
#1
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Jul 2004
Location: Kansas City, Missouri
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Best cam to fit my application??? So I had my cam narrowed down and then I got my heads back. Looks like I'll have to go alot smaller than I had planned. The heads are 241's milled .030 with 2.02 and 1.57 valves and the valve drop is .105 and .135 intake/exhaust respectively. I'm looking for opinions on the best cam that will fit for these heads. I'm also open to suggestions! Thanks!
Wouldn't let me post a poll so here goes:
224/228
226/230 F6
Other
Wouldn't let me post a poll so here goes:
224/228
226/230 F6
Other
Last edited by CMKworm; 06-20-2007 at 11:06 AM. Reason: No poll!
06-21-2007, 07:07 AM
#4
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Jul 2004
Location: Kansas City, Missouri
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
John @ futral was pretty sure the f11 wouldn't fit, also I've heard to stay within a 4 degrees split on the duration, is there any reason for this as in the 224/230?
