Taprxxt

I just bought a 2000 WS6 with 20k miles on it about three months ago. I have the SLP lid, Pacesetter LT's, and a Magnaflow exhaust. I was curious on what I would need to do to be looking at about 500rwhp without nitrous, a turbo, a supercharger or anything like that. Thanks.

thaigleshmk

More cubic inches would do it.

CRAGER

Try a search!

You would HAVE to get a stroker.

Peace,
Craig.

NC98Z

iTrader: (1)

Go over to the Gen 3 internal engine section and read PatrickGs post. He just put up a 500 hp build post.

Taprxxt

Thanks

hepcatws6

It can be done, but it all depends on how much you're looking to spend. Dollar for dollar would be ahead to do forced induction, but I know you don't want to do that. Looks like you'll be going for a cam, heads, headers, manifold...such and so forth. Maybe even think about stroking it.

Taprxxt

How much $ do you think i'd have to be spending to get there?

kbronSS

A LOT and u def wont be able to drive around as easily, due to the cam your probably gonna have to install in it. since u say u have only had it for about 3mos, i think u should read up more on the LS1 and maybe youll find out another route you will like. on another note, a 427 would get you there or maybe a 402, but youll easily be over 10k....at least i was.

Taprxxt

Yea thats a little more than I have, I might shoot for 400 to start with. Thanks again for the replies.

99blancoSS

iTrader: (115)

The budget always determins what you can do

NHRAMAN

iTrader: (1)

Procharger + Bolt-Ons.