LS1TECH Sponsor Feedback - Question for any sponsor/shop

I have two intake manifolds I need some flow testing done on. Do you offer such a service in house or will it have to be taken to someone else???

Just FYI, its a stock 5.3 truck intake manifold and a LS2 TBSS truck intake manifold... Let me know if you have provisions to do this work for me. Thanks.

Ben

nobody??? I really need to find out some numbers on these things.

We can do it but will also need your cylinder head and throttle body. Then you can see what each does in your application.


Thanks,
Shane

They will be flowed with the 90mm TB for the LS2 intake and the stock 78mm TB for the truck intake... pretty much stock for stock... they both will be used on ported 706 castings.

Now that a sponsor has replied, please take this to other methods of communication.

Thank You

Am I not able to get input from more than one sponsor? :confused:

Sure you can - though this forum is for feedback and we try to stay on track.

Another good place to give a shout out would be engine external/internal, sponsor gp and of course phone calls. Plenty of the shops are more than happy to help you over the phone and through their web sites to get just the right set up :nod:

Sure you can - though this forum is for feedback and we try to stay on track.

Another good place to give a shout out would be engine external/internal, sponsor gp and of course phone calls. Plenty of the shops are more than happy to help you over the phone and through their web sites to get just the right set up :nod:


I understand about keeping it on track... I moderate elsewhere on this internet LOL... know how it goes. I just really didnt think any other forum fit what I was trying to ask/do.... and I wanted to give our sponsors first shot at helping me out :cheers:

I guess I'll spend some time on the phone tomorrow researching.