View Full Version : Torque Management w/ M6?


Mr. B
11-06-2002, 04:51 PM
Is Torque Management a A4 ONLY thing?

Is Torque Management found in a PCM for an M6?

Gimp98TNT
11-06-2002, 07:13 PM
Nope no torque management on an M6

It my be in the pcm but i'm not sure.

<small>[ November 06, 2002, 06:16 PM: Message edited by: Gimp98TNT ]</small>

LOnSLO
11-07-2002, 02:41 PM
TM was set at 350 from the factory in my M6. Set it to 850 when it was dyno tuned. Noticed a little less drop off in power during hard shifts.

Mr. B
11-07-2002, 03:06 PM
I imagine that the 350 value was ft lbs of Torque, correct?

LOnSLO
11-07-2002, 03:10 PM
Yes, 350 ft-lbs. The power always would fall off a bit during high speed shifting. Now, it's balls to the wall. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

GMRACIN
11-07-2002, 03:20 PM
I have been having the same problem with my M6 on the 1-2 shift. I was thinking it may be a torque management problem. I will get that fixed! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

Colonel
11-08-2002, 01:44 AM
Something damn sure pulls the power WAAAAAAAAAY back on my M6 whenever I powershift 1st or 2nd. I think M6s do have TM.

jaywoo
11-08-2002, 12:22 PM
Good Info. Thanks!

shadowSS
11-10-2002, 03:11 AM
what option is it for the M6 in LS1edit?

StevieZ
11-10-2002, 08:46 AM
Just change max torque from 350ft.lbs.to 1000 ft.lbs.

2001CamaroGuy
11-10-2002, 03:57 PM
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by StevieZ:
<strong>Just change max torque from 350ft.lbs.to 1000 ft.lbs.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">directons please.....I'm ordering LS1Edit tomorrow