LS1MCSS

iTrader: (18)

I took my son for a short ride today. I put the wrong chip in the edelbrock box so the timing was too fast, as you can tell from the sound.
http://videos.streetfire.net/video/c...61015cb3ca.htm

DCx

iTrader: (12)

how was the carb install? that is my ultimate goal. do you have any pics of the install? im in the works of getting my hands on a 98 corvette ls1.id like to know where all the electrucal plugs go. plan is heads, cam, and long tubes on my 69 camaro.

you running a stock cam? i was planning on running the msd ls1 box for the lap top tuning and using the O2 bungs for an air/fuel meter.

LS1MCSS

iTrader: (18)

I'll make you a deal on everything you need to install the carb setup. I am going back to injection. I plan to build a bigger engine next year and would rather just retune the injection setup for it.

Oso SS

iTrader: (3)

wanna PM me what you want for that setup? If you're looking at a stock style set up I could ship you my **** too... but I've been wanting to go carb for awhile.

JL ws-6

iTrader: (50)

Looks like it's up and running..... and judging by the video, it runs pretty good! Get the injection setup on it, and it's gonna run a bunch better, that cam's probably not really big enough for that intake/carb setup, but with the injection it's gonna have throttle response and a power curve you will love!

LS1MCSS

iTrader: (18)

I can have my stuff ready to ship in the next couple of days, but the new valve covers don't go.

LS1MCSS

iTrader: (18)

It has good throttle responce. If it runs any better, I don't expect the rear to last long. It's still the stock 7.5 posi.

eagleuh1

Will you throw in the diamond plate valley cover with that carb and intake?????

LS1MCSS

iTrader: (18)

It will go with the carb setup. I won't need it.