1995 silverado 1500, 6.0 swap
07-05-2007, 03:39 PM
#3
LOL!!! I knew that was gonna happen. I haven't seen a lot of gen III/IVs in the 88-98 trucks here, I would try http://forum.ls1truck.com they have a lot more over there.
07-05-2007, 06:13 PM
#4
LS1 Into Your '95 Truck... There is a lot over there, but there is even more info over here. 
I could not have done mine without this site. Everything you need is here, if you search. The first thing you need is another vehicle to get around in, which I see, you have. Then buy EVERYTHING you can think of(write it down), after your research, & go buy it. Don't throw anything away that you take OUT of your truck, until the swap is totally complete. If you have a SPECIFIC question you need answered after you get started, ask away... Thats whats this site is all about.
I could not have done mine without this site. Everything you need is here, if you search. The first thing you need is another vehicle to get around in, which I see, you have. Then buy EVERYTHING you can think of(write it down), after your research, & go buy it. Don't throw anything away that you take OUT of your truck, until the swap is totally complete. If you have a SPECIFIC question you need answered after you get started, ask away... Thats whats this site is all about. Last edited by LS1GMCTruck; 07-07-2007 at 08:14 AM.
Trending Topics
07-07-2007, 12:48 PM
#9
Throttle Body Choice Personally, I prefered the cable version on my '96. My exsisting throttle cable was the perfect length & it snapped right into the LS1 throttlebody. Done. Your '95 may or may not have the same end on the cable, I don't know. Just another one of those hundreds of little things that need your reasearch. Worst case scenario, you have to buy a new throttle cable, which isn't expensive.
Last edited by LS1GMCTruck; 07-07-2007 at 12:56 PM.
