Forced Induction Superchargers | Turbochargers | Intercoolers

cam and injectors for turbo

Old 07-10-2007, 07:31 AM
  #1  
12 Second Club
Thread Starter
iTrader: (10)
 
whitedevilWS6's Avatar
 
Join Date: Jan 2007
Location: Charleston, SC
Posts: 226
Likes: 0
Received 0 Likes on 0 Posts

Default cam and injectors for turbo

i was thinking of running an STS w/ 67mm upgrade. would a 226/228 113lsa cam be too aggressive? i was also thinking of using 61# injectors. i've heard that those injectors are overkill for only about 8-10 psi and will go bad because they're too big and/or they'll dump too much fuel. any help?
Old 07-10-2007, 08:13 AM
  #2  
TECH Regular
iTrader: (5)
 
SonofaBish's Avatar
 
Join Date: Apr 2006
Location: Pittsburgh, PA
Posts: 478
Likes: 0
Received 0 Likes on 0 Posts

Default

i'd say the cam will be a good one... i wish i had gone with one a little more like that..... only has 1* of overlap if i calculated in my head correctly

as far as the injectors.... dunno... i'm using 60's for about 14-15 lbs boost... i think they'd be ok, but i'm no expert so i might be wrong
Old 07-10-2007, 08:23 AM
  #3  
Launching!
 
Ironmancan's Avatar
 
Join Date: Jul 2006
Location: Tampa
Posts: 214
Likes: 0
Received 0 Likes on 0 Posts

Default

Had 60lbs on mine when I was running 9 lbs of boost no problems. Still using them for 15 lbs. I know quite a few that have the same injectors and are running the same boost (9lbs) no issues either.

Camp Lejeune eeh. I've got orders there to 2nd Tracks I'll be checking in Sept 1st. Big step down from Tampa but what are you gonna do
Old 07-10-2007, 11:18 AM
  #4  
Closed Sponsor Account
iTrader: (3)
 
Josh@MASPORT's Avatar
 
Join Date: Jun 2007
Location: Boca Raton
Posts: 235
Likes: 0
Received 0 Likes on 0 Posts
Default

the 60pound injectors are very good for almost any setup, especially because u wont have to buy new ones down the road (ive used 60pound inj. on a stock motor).
i can set you up with a great deal on MSD 60pound high impedence injectors, let me know..

JOSH


Thread Tools
Search this Thread
Quick Reply: cam and injectors for turbo



All times are GMT -5. The time now is 08:19 PM.