07-15-2007, 10:52 AM
I'm hoping someone here can tell me whats going on with my amp. It's a 4 channel infinity. I've used it to power two speakers for a while and it's always worked fine. I finally put in a sub this weekend and got it all mounted up and wired. It worked for a little bit and sounded great, but unfortunately I wasn't careful enough putting my seat back in and pinched a speaker wire. Next time I tried it it made a loud noise and I turned it down real quick. I found the wire and fixed it, but now I can't get anything out of my amp. There's three lights on the front of it, a clip, power, and protect. They all flash and the owners manual doesn't say much on what could be wrong. In trying to solve the problem I unplugged all of the speaker wires and RCA cables. When I powered it up, the lights still flashed. I then pulled the battery to see if I could reset it or something, but it didn't do anything. I tested all of the fuses and they're fine. Anyone have any ideas? I guess I'm mostly wondering what could happen if two speaker wires touched or got grounded out. Thanks!