yellowjacket48

iTrader: (3)

Video clips of GM Hot Cam please!!!!!!! I just want to hear what one sounds like!!

White_Ls1

http://www.fquick.com/videos/viewvideo.php?id=2459 This is mine un-tuned with the cut out open. Ill post a few more through the exhaust when I get off work. BTW I really enjoy the cam!!

TXZ28LS1

iTrader: (5)

pm my buddy blkbird!! hes running the hotcam, with unported ls6 heads, longtubes and ory with a hooker muffler. the hotcam has a decent idle for a little cam that it is..

litle88

iTrader: (20)

Ask and you shall receive brotha!!
It was not tuned yet, going on friday!! with the results all of my mods in sig are in!!!

http://www.fquick.com/videos/viewvideo.php?id=2420

yellowjacket48

iTrader: (3)

I'm looking at this cam for some gains, but it won't void my warranty on my Goat. I have SLP headers with SLP LM1 exhaust. And I absolutley love that choppy idle. If I could go 110 lsa I would, but I don't think anyone makes one without having to swap heads and a ton of other stuff. Can you feel the powerband in the cam in the seat of your pants or do you hardly notice it. I want power u can feel.

litle88

iTrader: (20)

Heck yea, you can really feel it especially low and in the upper rpm range!
It is choppy, and definately needs a tune cause if you turn on the AC it will shut off at the light
Or if you come to an abrupt stop the car will feel like it wants to shut off, which it wont but it will take it a second or two.
No complaints from me though, I love it and I dont care what these guys with big donkey dick lift cams say! I still got my warranty!!
NOW WHAT!!
I'll keep you posted if you like, straightline performance will be tuning it on friday morning and hopefully I can record it!

740racing

iTrader: (10)

Get the GM ASA cam, its a 110lsa and if you love choppy idle youll love the ASA cam.

litle88

iTrader: (20)

Also the guy that installed my cam had just finished installing a hotcam on an 06 GTO, and that **** sounded sick!!
A Pontiac dealer in lafayette indiana installed it for me!

yellowjacket48

iTrader: (3)

With the ASA cam, what all needs to be swapt out? For example, pushrods, springs, etc??????

yellowjacket48

iTrader: (3)

ALso, does anyone know the part# of the hot cam & ASA cam from GMpartsdirect.com?

litle88

iTrader: (20)

I believe a lil longer pushrods, you can use the LS6 springs.
SDPP is a sponsor and sells them!!
I here they are hard to tune, but you may want to ask!
here are some threads:

https://ls1tech.com/forums/generation-iii-internal-engine/991-paging-cammin-beast.html
https://ls1tech.com/forums/generation-iii-internal-engine/96060-anyone-using-asa-cam-info.html

https://ls1tech.com/forums/showthread.php?t=96060 my favorite!!


http://www.sdparts.com/product/12480...rCamshaft.aspx

Full-Force

iTrader: (11)

Hotcam, longtubes, ORY, Hooker catback

HOTCAM

Just for comparison here is my car with the MS3 and duals

MS3

litle88

iTrader: (20)

Nice!!!, but those are TD's right, and not a catback?

Full-Force

iTrader: (11)

Read my post again. Thanks.

Asmodeus

Just be sure you guys want such a small cam.. I just don't want to see you guys in the dyno section wondering why you aren't matching the HP numbers of bigger cammed cars.. and you won't..

m8w6r77

what kinda of hp/tq numbers are these cams putting out?

35thUCF

ASA All the way! you cant beat the sound

White_Ls1

I am going to have mine dyno tuned in a few weeks Ill post the results.

Asmodeus

I'm guessing a hotcam with full bolt-ons should make 370hp/360 tq.

WS6WRX

iTrader: (1)

I put down 377hp/374ft lbs corrected on a DynoJet, Hotcam, Jethot LTs, ORY, Corsa cat back, lid and Predator tune.

http://www.ls1sounds.com/Corsa/corsa..._WS6-idle.mpeg
http://www.ls1sounds.com/Corsa/corsa...-slow-rev.mpeg
http://www.ls1sounds.com/Corsa/corsa..._WS6-revs.mpeg
http://www.ls1sounds.com/Corsa/corsa...t_WS6-????.wmv