00silver6

iTrader: (4)

Im getting ready to get the lower air intake assembly off a 00' firebird and i have the fipk is there any parts i need to make sure i get for this transiton? i dont have any emmisions equipment on her so do i just buy the lid without that hook up and plug that sensor in and thats it>

bww3588

iTrader: (49)

you need the lower air box, the bolts that hold down your K&N lower assembly will work on your lower air box, you will need the bellows that goes between the MAF and TB. the one from your K&N will work, but im sure if you sell it the buyer will want it. good choice BTW, K&N FIPK sucks for these cars.

00silver6

iTrader: (4)

yeah thats the same thing i was thinking. square filter being the best for a mass flow of air and where it finds the air. thanks just double checking before

bww3588

iTrader: (49)

for a Z28/Trans Am, it sucks. the only place its getting air from is the hot motor. now for a SS/WS6, i could see it being more effective, however, a good lid with a good ram air setup like the FTRA, SSRA, BGRA, or SLP system is miles better than the K&N FIPK.

Tainted

iTrader: (9)

Tainted: No sponsors on this site need to be told to go to hell.




-orangeapeel

bww3588

iTrader: (49)

i feel you on that chuck, but its still better than the FIPK.

MUSTANGBRKR02

iTrader: (91)

do not forget to get the filter tray