Zr1's N2O and Lowering srings F/S!
07-21-2007, 05:46 PM
#1
Launching!
Thread Starter
iTrader: (9)
Join Date: Nov 2005
Location: Arizona
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Zr1's N2O and Lowering srings F/S! Selling my ZR1 wheels, polished aluminum. 17x9.5 and 17x11. BFG gforce drags 315/35/17 on the rears, pretty good tread life left, only a hand full of passes on them. Wheels are pretty nice, no real curb rash, like three spots on like two wheels that are so small, 400 grit would take them down. The tires on the front are kinda worn, but I'll include a set of old (but good tread) BFG's as well. Sat in the shop for a month, so they were kinda dusty when I took the pics.
$550 *SOLD*
The n2o off my car. NX wet kit, hand full of jets. you will need a switch, and some lines for the purge, thats all. You get the brackets too that I had made for the car...
$250 SOLD
And, my Eibach pro kit lowering springs...Like new.
$100
everything is located in Kingman AZ. I need a DD, so I am selling this stuff. If anyone is interested, call me at 928 303 8562
-Koty
$550 *SOLD*
The n2o off my car. NX wet kit, hand full of jets. you will need a switch, and some lines for the purge, thats all. You get the brackets too that I had made for the car...
$250 SOLD
And, my Eibach pro kit lowering springs...Like new.
$100
everything is located in Kingman AZ. I need a DD, so I am selling this stuff. If anyone is interested, call me at 928 303 8562
-Koty
Last edited by whitedevil; 08-03-2007 at 03:01 PM.
07-23-2007, 04:30 AM
#7
Launching!
Thread Starter
iTrader: (9)
Join Date: Nov 2005
Location: Arizona
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
I will consider the trade, but am in need of more money than I am in wheels, after all, I allready have TTII's but hell, send me some pics, and I'll think about it....
Trending Topics
07-23-2007, 05:10 PM
#8
TECH Addict
iTrader: (14)
Join Date: May 2005
Location: Simi Valley, CA.
Posts: 2,727
Likes: 0
Received 0 Likes
on
0 Posts
HAHAHA!!! Didn't even notice your sig pic. There arer pics of them on my fquick page.
I might have a buyer for mine anyways so you might be in luck in the money end.
The tires you will include for the front..... Are they in good condition. No side wall cracks, wierd wear pattern, etc.?
I might have a buyer for mine anyways so you might be in luck in the money end.
The tires you will include for the front..... Are they in good condition. No side wall cracks, wierd wear pattern, etc.?
07-26-2007, 03:54 AM
#13
Launching!
Thread Starter
iTrader: (9)
Join Date: Nov 2005
Location: Arizona
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
I have seen the Pro Kit lower cars from 1.8 to 2.5 inches, really depends on the spring/sstrut/shock combo you are running. I believe they are said to lower the car "1.75 inches" from Eibach. They look good, and dont ride rough like sport lines do.
07-26-2007, 02:40 PM
#17
TECH Apprentice
iTrader: (4)
Join Date: Jan 2006
Location: Harrisburg, PA
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
Send pics of the complete nitrous kit to texinteg@yahoo.com please. What would shipping be to 17404 and/or 92009.