Lunati 221 cam in a 6.0 with stick heads
07-30-2007, 11:39 PM
#1
Teching In
Thread Starter
Join Date: Jul 2007
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Lunati 221 cam in a 6.0 with stick heads stock 6,0 (lq4) block lunati 221/221 @50 with 558/558 lift cam stock heads with valve job and new springs and push rods, I would build stronger but this will be my sons first 16 year old car, The motor will be a fresh rebuilt with 12 months 12000 mile warrenty, how much HP and TQ do yall think? 98 z28 6speed.
Last edited by jethro81z28; 07-31-2007 at 12:02 AM.
08-02-2007, 11:10 PM
#4
Teching In
Thread Starter
Join Date: Jul 2007
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
To much of a car your prob. right, Hes gone 11.70s in my 81 but whin I was 16 I had a buick skyhalk V6 4.1 600 holley a 5 speed trans that I raced in houston it ran 13.50s Back on the Z 375hp should be in the 12s?
08-02-2007, 11:17 PM
#5
Originally Posted by jethro81z28
To much of a car your prob. right, Hes gone 11.70s in my 81 but whin I was 16 I had a buick skyhalk V6 4.1 600 holley a 5 speed trans that I raced in houston it ran 13.50s Back on the Z 375hp should be in the 12s?
