Flow sheet for GTP stage 2 243s?
#1
Flow sheet for GTP stage 2 243s?
Does anybody have any flow sheets from a set of GTP stage 2 or 2+ LS6 243 castings from around 2003 or so. I came across a set for a good price with only 300 miles on them, they already have a good dual spring &titanium retainer setup on them also.
How would these compare to maybe the TSP or Livernoise LS6 stage 1 offerings. They both claim 305-310cfm with factory 2.00" & 1.55" valves.
Was hoping some of the older crowd might have some info, or valued opinion about these heads.
Thanks
Floyd
How would these compare to maybe the TSP or Livernoise LS6 stage 1 offerings. They both claim 305-310cfm with factory 2.00" & 1.55" valves.
Was hoping some of the older crowd might have some info, or valued opinion about these heads.
Thanks
Floyd
#2
10 Second Club
iTrader: (1)
Join Date: Aug 2004
Location: Burbank, SoCal
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Stage 1 Prc heads look like this. I put down 460//414 to the wheels with these heads and an ms3 cam from TSP. I'm still missing a few bolt ons also.
http://www.texas-speed.com/shop/item...d=649&catid=40
Valve Lift Intake
.100" 72
.200" 149
.300" 205
.400" 255
.500" 287
.600" 307
.625" 310
http://www.texas-speed.com/shop/item...d=649&catid=40
Valve Lift Intake
.100" 72
.200" 149
.300" 205
.400" 255
.500" 287
.600" 307
.625" 310