Rebuilding my trans, need advice
#1
TECH Fanatic
Thread Starter
iTrader: (10)
Join Date: Apr 2006
Location: Fort Worth, Tx
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
Rebuilding my trans, need advice
I decided its time to rebuild the good ole 4l60 in my car, and i have a few plans but i dont know where to get the parts i need to do what i want. i need to find who sells a good rebuild kit with bw clutches, sprag, kevlar band, etc. need to find a vette servo and aluminum accumulator pistons too. also, i'm looking for a reverse manual valve body and a ratchet shifter. i searched b&m's website for a shifter and a few websites for the valve body but couldnt find anything. any help is greatly appreciated.
#3
TECH Fanatic
Thread Starter
iTrader: (10)
Join Date: Apr 2006
Location: Fort Worth, Tx
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
ok cool man. will do.
as far as a plan goes, i just want a strip/street trans for the car, no plans on power adders in the future. and i think i've talked myself out of the whole manual valve body and ratchet shifter after all.. i thought it would be fun but the added cost makes the project too expensive at that point. i can take care of the tc, shift kit, and a trans cooler, its mainly the rebuild kit i need to put together.
as far as a plan goes, i just want a strip/street trans for the car, no plans on power adders in the future. and i think i've talked myself out of the whole manual valve body and ratchet shifter after all.. i thought it would be fun but the added cost makes the project too expensive at that point. i can take care of the tc, shift kit, and a trans cooler, its mainly the rebuild kit i need to put together.