Anyone using Trick Flow heads
#1
Staging Lane
Thread Starter
Join Date: Dec 2002
Location: Birmingham Al
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Anyone using Trick Flow heads
As it says...I'm thinking of going with these heads on a 370 iron block, stock LS6 intake and T70 on about 14-16#. The heads can be worked to get a 70cc chamber, needed to get my compression down. Any comments/advise?
#2
TT-TECH Veteran
iTrader: (29)
I have them on my Orange car they are great heads I have AFR's on the black car for FI they are pretty evenly matched NA the Trick Flows have a slight advantage from what I have seen although not a ton. I Like them just buy a good LIGHT set of Roller rockers for them and you will be very pleased.
#4
7 Second Club
iTrader: (18)
Join Date: Mar 2004
Location: Cincinnati, Ohio
Posts: 790
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HUNTER02SS
The shop that did my turbo setup just put a set on a twin turbo car. they seem to work well and made power sooner than it did with the ls6's.
That's because they have better mid-lift flow than most heads. We have a set for our DR car debuting next spring and were expecting good results for a reasonably priced head.
#7
10 Second Club
iTrader: (45)
Join Date: Dec 2004
Location: Seabrook, TX
Posts: 1,516
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Inspector12
I have them on my Orange car they are great heads I have AFR's on the black car for FI they are pretty evenly matched NA the Trick Flows have a slight advantage from what I have seen although not a ton. I Like them just buy a good LIGHT set of Roller rockers for them and you will be very pleased.
Jeff have you got the black car back together??
Trending Topics
#9
10 Second Club
iTrader: (45)
Join Date: Dec 2004
Location: Seabrook, TX
Posts: 1,516
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Inspector12
Well I was supposed to go to the Jam this weekend but another rain out so I will be doing the allnighters this weekend to get her running again.
#10
Originally Posted by Inspector12
I believe that would be Summit now I think they bought them out.
Basically the Jist of my response was to give him a call.. They have awesome deals on that stuff!!!
#11
TT-TECH Veteran
iTrader: (29)
Originally Posted by 2000TurboVert
They are the biggest none mail order retailer.. You cant compete with summit and jegs.. But besides them its Vengeance!!!
Basically the Jist of my response was to give him a call.. They have awesome deals on that stuff!!!
Basically the Jist of my response was to give him a call.. They have awesome deals on that stuff!!!
#13
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Inspector12
Well I was supposed to go to the Jam this weekend but another rain out so I will be doing the allnighters this weekend to get her running again.
#15
Staging Lane
Thread Starter
Join Date: Dec 2002
Location: Birmingham Al
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the replies guys. I've been really busy with my trucks this week and not been able to get online til now. The A/C went down in all 3 of em. $3000 later and got em fixed. THAT cut into the build money all right!! Ron; I'll call you about the heads. The short block is being built by Weber and Leo says he can "help" me out if I get the complete long block through him, heads included of course.