Holley 90mm TB ... what are your thoughts?
08-16-2007, 06:10 AM
#1
Holley 90mm TB ... what are your thoughts? I'm pretty happy with my new Holley 90mm TB/FAST 90 intake setup. The new FAST 90 I received was said by NLP to be sticking badly. Geoff there was gracious enough to purchase me a new Holley 90mm. Mike Norris of Norris Mororsports had previously reccommended the same TB. I like it. Anybody else here have one? What is your opinion about it? If negative please state why. I you have positive comments please state why, as well. Thanks.
08-16-2007, 08:33 AM
#2
TECH Resident
Join Date: Jun 2007
Posts: 952
Likes: 0
Received 0 Likes
on
0 Posts
i have one-it ***** on the fast 90 ml-it matches the fast 90 inlet nicely-tappers down equally-
i went through 2 fast 90 tb until i had enough-
i can't believe the fast 90 tb is still having these sticking issues-why does fast still leave them on the selling rack if they know there is a issue with them
the holley 90 tb also looks and performs good-
i went through 2 fast 90 tb until i had enough-
i can't believe the fast 90 tb is still having these sticking issues-why does fast still leave them on the selling rack if they know there is a issue with them
the holley 90 tb also looks and performs good-
08-16-2007, 01:08 PM
#3
Yeah, instead of bushing, they are bearing-driven and I can feel the difference. I thought FAST corrected this issue nearly 2 years ago, but, apparently, they didn't and are still selling the throttle bodies. They told my shop they wanted to test it before they would replace it, from my understanding. = poor support
Fortunately, my shop owner was willing to just buy one from Holley for me ... to take care of me. = good support
Fortunately, my shop owner was willing to just buy one from Holley for me ... to take care of me. = good support
