bowtierodder

iTrader: (3)

ok i tried the sticky and a the search but just came up with more questions than answers. so here goes.....

i have a th400 tranny w/ converter for an ls1 (long snout)

i have a 98 flex plate (flat style), will this combo just bolt up or are spacers or anything else required

also it used to be an m6, do i have to take the pilot bearing out of the back of the crank??????

and im using the bmr crossmember, what trans mount do i need?

thank everyone

Gilbert@Ace Racing

Replied to your P.M.!


g

408z28

iTrader: (44)

1. Leave the pilot bearing...no need to remove it.

2. Use your stock 6sp. crossmember w/ th400 mount

blkbird_WS-6

iTrader: (14)

I used the tranny mount off of the M6 when I had the TH 400 in my car. You have a PM by the way.