Small Block & Big Block Chevy Specific - 350ci GM Short Blocks For Sale!!!

We've got a surplus of short blocks that we need gone before inventory! NOTE: THESE ARE NOT LS BASED ENGINES.

New in the crate. 4 bolt main, 1 piece rear seal, hydraulic roller block. 350 cubic inch. The pistons are dished and will give 8.7 to 1 with a .040 thick head gasket and a 64cc combustion chamber. The pistons and crank are cast. They carry a 1 year parts only warranty! NOTE: No cam, lifters, or timing set included.

Call me to order!! Most orders will ship same day! $699 plus shipping!

http://i7.ebayimg.com/07/i/000/8e/ca/c536_1.JPG
http://i7.ebayimg.com/06/i/000/8e/ca/c4c0_1.JPG

Call me to order!!

What kind of rods are in it?

They are powdered metal steel rods.

what is the dish size in cc's on the pistons, and how far in the hole are they. also is this a stock 4.00" bore new block or a remaned engine.

Dish is 18cc's....stock 4.00" bore. Pistons are about .010"-.015" in the hole.

Are these similar to L98 short blocks. what kind of comp with 58cc heads? Thanks.

They are "L05" to be exact (basically L98 with a different piston). It'll be about 9.2:1 with a .040" thick gasket and 58cc heads.

I bet allot of people want flat tops huh?

For more compression and a forged crank we offer the ZZ4 shortblock :) For those wanting an inexpensive replacement for their car/truck that aren't looking for bigger compression these fit the bill.

What is the price difference for the ZZ4? I never run a forged crank unless i know i am going over 500 HP.

BUMP! These have got to go!!