Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

????steal braided line????

Old 09-02-2007, 12:06 PM
  #1  
Teching In
Thread Starter
 
rwta's Avatar
 
Join Date: Sep 2007
Location: detroit
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Question ????steal braided line????

Driving my car 2day went 2 change gears and there was no peddle. Got out 2 see what the heck was going on seen the steal braided line blown off where it connects 2 the master cyclinder under neath the brake booster. what holds that line on? Is it a clip, a pin or something. And do I have 2 pull out the hole cyclinder 2 reconnect?
Old 09-02-2007, 01:12 PM
  #2  
TECH Fanatic
iTrader: (25)
 
shoemike's Avatar
 
Join Date: Dec 2005
Location: Prescott, AZ
Posts: 1,283
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by rwta
Driving my car 2day went 2 change gears and there was no peddle. Got out 2 see what the heck was going on seen the steal braided line blown off where it connects 2 the master cyclinder under neath the brake booster. what holds that line on? Is it a clip, a pin or something. And do I have 2 pull out the hole cyclinder 2 reconnect?
it is a roll pin and yes you will need to pull off the master to install it.
i hope you didn`t lose the o-ring that is on the end of the line.
Old 09-02-2007, 01:46 PM
  #3  
Teching In
Thread Starter
 
rwta's Avatar
 
Join Date: Sep 2007
Location: detroit
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

The o-ring is still there but the pin is not. But how could that pin come out on its own when in all the install guides you need to knock the pin out with a punch and a hammer?


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:13 PM.