Anyone running Dr. Gas Boom Tubes?
#1
Launching!
Thread Starter
iTrader: (25)
Join Date: Jan 2006
Location: Hamilton Twp, NJ
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Anyone running Dr. Gas Boom Tubes?
Anyone ever heard these on a street car?
http://www.drgas.com/store/product.p...7&cat=4&page=1
I was curious. Thinking of building a new exhaust, oval tubing and flaring out the side just in front of the tire....one on each side? Noise levels and clearance near the fuel lines on the driver side though have me concerned. Really would like to hear them before plunking down cash.
Thanks
http://www.drgas.com/store/product.p...7&cat=4&page=1
I was curious. Thinking of building a new exhaust, oval tubing and flaring out the side just in front of the tire....one on each side? Noise levels and clearance near the fuel lines on the driver side though have me concerned. Really would like to hear them before plunking down cash.
Thanks
#2
TECH Addict
iTrader: (3)
there was one guy on here that did boom tubes a while back....cant seem to find the post. He used a crapload of heat reflective tape to cut down on the heat, but supposedly it sounded good...but really loud haha.
edit: here's an example
https://ls1tech.com/forums/showpost....87&postcount=1
edit: here's an example
https://ls1tech.com/forums/showpost....87&postcount=1
#3
Launching!
Thread Starter
iTrader: (25)
Join Date: Jan 2006
Location: Hamilton Twp, NJ
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the link....at least now I know there is room.
Chris
Chris
Originally Posted by Grimes
there was one guy on here that did boom tubes a while back....cant seem to find the post. He used a crapload of heat reflective tape to cut down on the heat, but supposedly it sounded good...but really loud haha.
edit: here's an example
https://ls1tech.com/forums/showpost....87&postcount=1
edit: here's an example
https://ls1tech.com/forums/showpost....87&postcount=1
#4
LS1 Tech Administrator
iTrader: (14)
Moved from Gen 3 internal section.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.