806 heads, any good?
09-04-2007, 05:13 PM
#1
12 Second Club
Thread Starter
iTrader: (3)
Join Date: Jan 2006
Location: NEWARK OHIO
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
806 heads, any good? im buying some heads so i can shave them and put bigger valves in them i found some 806 castings cheap am going to buy them unless someone talks me out of it. .585 cam going in also bout 6500 rpm. and what would these catings be off of? any help would be great. my car is a 2000
09-04-2007, 06:32 PM
#4
https://ls1tech.com/forums/showthrea...&highlight=706
Read the whole thread they correct the specs as they go, But I think that 806 are fairly old, I wouldnt use em but if your gonna port em anyway then it doesent matter.
Read the whole thread they correct the specs as they go, But I think that 806 are fairly old, I wouldnt use em but if your gonna port em anyway then it doesent matter.
