Single turbo Setup
#1
Teching In
Thread Starter
Join Date: Sep 2007
Location: Midland GA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Single turbo Setup
I am looking for the headers and cross over pipe to do a single turbo setup on a 434 in a 3rd gen camaro. This will be a blow through with a 750 dominator..
#4
9 Second Club
iTrader: (14)
Originally Posted by 383lt1impala
Im Not A Big Expert But I Bet Its Not A Wholeeee Lot More For Twin Turbos
Twins are player tho... .lol
#6
Teching In
Thread Starter
Join Date: Sep 2007
Location: Midland GA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Wow thanks for the very quick replies. I have been thinking about the twins but just do not know if I want the headach or not.
I just might have to do the twins...
Anyone here have a picture of a 3rd gen with twins?
I just might have to do the twins...
Anyone here have a picture of a 3rd gen with twins?
#7
9 Second Club
iTrader: (14)
Originally Posted by UDL0SE
Wow thanks for the very quick replies. I have been thinking about the twins but just do not know if I want the headach or not.
I just might have to do the twins...
Anyone here have a picture of a 3rd gen with twins?
I just might have to do the twins...
Anyone here have a picture of a 3rd gen with twins?
you can buy a "kit" for twins on those cars
Trending Topics
#8
TECH Senior Member
iTrader: (127)
yes, twins with t3 60-1 turbos,
used akit of ebay for friends car, ebay alum.heads, headers were 321 ss
fit really good for use with 38mm wategate, per header, also blo thru. with csu carb., th400 3500 stall, with anti-ballon plate, 9 in. with 3.10 gears.
still waiting on parts to complete, also using large fmic.
car is 86 camaro with tub. kmember
used akit of ebay for friends car, ebay alum.heads, headers were 321 ss
fit really good for use with 38mm wategate, per header, also blo thru. with csu carb., th400 3500 stall, with anti-ballon plate, 9 in. with 3.10 gears.
still waiting on parts to complete, also using large fmic.
car is 86 camaro with tub. kmember
#11
You could fab up a kit if you're good at welding. Flip an old set of headers and get some pre-bent tubing, there are lot of places online that sell it. A big single would be cheaper and make similair power. Theres also plenty of places that sell manifolds, then would just have to make the crossover pipe and the rest of the hot side. Also look into s400s if you want to stay big single, theyre a fairly common turbo that can be found somewhat cheap.
http://www.theturboforums.com/smf/in...?topic=96088.0 <-- not so great looking, but functional
http://www.turbomustangs.com/smf/index.php?topic=4049 <-- DIY singles
http://www.turbomustangs.com/smf/index.php?topic=39744 <-- more DIY singles
http://www.theturboforums.com/smf/in...?topic=96088.0 <-- not so great looking, but functional
http://www.turbomustangs.com/smf/index.php?topic=4049 <-- DIY singles
http://www.turbomustangs.com/smf/index.php?topic=39744 <-- more DIY singles