crz28

Lets say you have a camaro m6 stock weight, on drag radials on a well preped track with all the mods to hook up with 550rwhp , what times do you think it will run in the 1/4 mile.

Ray@Nitrous Outlet

to many variable to give a good answer....but I ran a 10.4 @130 w/530whp through an A4 and 3400#

so I would guess low 11's to high 10's w/high 120 mph

97blkz

iTrader: (1)

As stated before too many variables, what clutch, what tire , what susp ETC...

93blacktransam

iTrader: (6)

Fast lol

96capricemgr

iTrader: (1)

Anywhere from high 9s all the way up into the 11s is a realistic range. High 9s would obviously be in a car setup for the track and nothing else.

Thing people don't understand is even besides traction HP is not always speed some setups dyno well but just do not perform on track.

Toronto_LT1

iTrader: (-1)

waaay faster than my bolt-on LT1 ...lol

InsaneAuto86

iTrader: (60)

I watched my friend run 11.3 on an otherwise stock LT1 T/A m6 (LE2 package) with M/T steets, so I would say in the 10's easily.

96capricemgr

iTrader: (1)

So it was stock intake tract, stock TB, stock manifolds, stock cats and catback, stock gears, stock injectors, etc.?

DroppedM6Z

iTrader: (5)

13.1 @ 142 on a 3.42 10 bolt

the_merv

iTrader: (88)

13.1 @ 142..
if I ever saw that as a legitimate slip..I'm callin

Ray@Nitrous Outlet

I have a 14.2@120 somewhere

the_merv

iTrader: (88)

^^ I can see that.. you were spinnin your *** off then..
But that 142 one is insane..that is some serious traction issues..

fergymoto

iTrader: (129)

Pretty sure he was joking...

DroppedM6Z

iTrader: (5)

umm.....yeah dudes

the_merv

iTrader: (88)

See..I knew it.


I'm playin..boredom is getting to me..

camar0corey

iTrader: (22)

I can't launch for ****, after I get your guy's plate system and The_Merv's motor installed I'll probably run something like that.

Ari G

iTrader: (25)

550hp is not the same as another car with 550hp,i depends on the average hp/tq

You see 400rwhp cars in the 11s so high 9 is doable on a light car

the_merv

iTrader: (88)

I think it would be a good run to run my new Engine vs. my old one that I built after you guys get done with it..all-motor to the same will be a one-sided match..but you on N20 and me on just Engine would be an interesting race...

DroppedM6Z

iTrader: (5)

Ed Wright was making 532rwhp with his T/A and going 9.9x @ 130+. Last time i talked with him for awhile it was weighin a few hundred short of 3000 and dragin the back bumper and catchin the 60 with the back tires

the_merv

iTrader: (88)

That's Parachute class right there..