97HawkLT1

iTrader: (11)

OK guys, I am doing an OBD1 Conversion. I have the PCM, cable, Tunercats, and Datamaster. The problem is the PCM I got was tuned for an M6 as well as a bunch of mods. I am wanting to start with a clean slate from a stock tune for my car. I have looked at the moates and DIY-FI sites as well as searching here and found several BINs but I can't verify whether they are stock and what gears, etc. So I was hoping that some one here has a STOCK BIN for a 95 T/A A4 with 3.23 gears that they could send me. Any help is greatly appreciated. Thanks.

fergymoto

iTrader: (129)

I have one for a '94 Z, 3.23 A4. Same thing. Email me at fergymoto@fbody.com

seawolf06

iTrader: (8)

There's a site with a bunch of .bin and .lt1 files. I think it's Ben Franker's site.

fergymoto

iTrader: (129)

^Yep. Find that site. There's a lot on there.

ZONES89RS

iTrader: (25)

****, i am trying to learn EFI tuning period so i can use a Mqgasquirt system for my 95.

dhdenney

iTrader: (53)

I have used Franker's site a lot. A little handy tool to use also is a .bin to .lt1 converter.