i cant get my car to shift when running!!
#1
TECH Regular
Thread Starter
iTrader: (21)
Join Date: Mar 2005
Location: butler, pa
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Please Help Me!!!!
this is everything ive done.
replaced the slave twice. couldnt get it into gear when it was running. so i replaced the master once and still nothing. so i thought my clutch was shot. pulled it out repalced it with a brand new mcleod street clutch. and i put it all back together and still cant get it in gear!!!
gm dealers are no help to me. can anyone think of wtf it is??
also since there is NO bleed screw on the slave or the master i just pushed the slave rod in 1000 times. and STILL nothing
replaced the slave twice. couldnt get it into gear when it was running. so i replaced the master once and still nothing. so i thought my clutch was shot. pulled it out repalced it with a brand new mcleod street clutch. and i put it all back together and still cant get it in gear!!!
gm dealers are no help to me. can anyone think of wtf it is??
also since there is NO bleed screw on the slave or the master i just pushed the slave rod in 1000 times. and STILL nothing
Last edited by ricknbird350; 09-27-2007 at 08:28 PM.
#2
On The Tree
Join Date: May 2005
Location: Catawissa PA
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Only thing I can think of is that the clutch isn't releasing. When mine went if I put the car in gear, pushed down the clutch and turned the key and car would move as if the peddle wasn't down.
#3
TECH Regular
Thread Starter
iTrader: (21)
Join Date: Mar 2005
Location: butler, pa
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
yes thats what its doing with the new clutch and slave and clutch master cylinder. so what should i do now? what should i try? its been months that i couldnt drive it...this sucks