Forced Induction - My custom single turbo results.




View Full Version : My custom single turbo results.


prostock_bigblock
09-28-2007, 02:09 PM
Heyy all , its been a while since I dynoed my car, I thought posting this since I will do my fuel system next week .
anyways this kit was built by Brian ( B&G custom turbos) in Belmont Ohio and he did an awesome work.

here is the link of the build http://ls1tech.com/forums/showthread.php?t=655490&highlight=turbo+project+finally

the car made 514rwhp and 414rwtq on 2.9 psi tial spring :cheers: with a 1 bar tune, stock map, stock mass air, ls1 intake ..... only mode is a ported TB.

fuel system was completly stock except for the 60lb injectors.

http://i51.photobucket.com/albums/f369/prostock_bigblock/001.jpg

again special thanks to Brian and also Maxxxboost from this board for tunning the car.


Patrick G
09-28-2007, 03:09 PM
Nice power for such low boost. Time to turn it up.

prostock_bigblock
09-28-2007, 07:41 PM
7 psi next couple of weeks with a custom cam and home ported 317 casting wish me a good luck.


SuperZ
09-28-2007, 09:18 PM
good numbers but why would you ever even be running only 2.9 psi!!!! Why dyno with 2.9 psi????? :confused: Im sure the car will be a beast with more boost though

hellbents10
09-28-2007, 09:51 PM
No kidding that thing should make some nice power at 7psi

prostock_bigblock
09-28-2007, 11:57 PM
good numbers but why would you ever even be running only 2.9 psi!!!! Why dyno with 2.9 psi????? :confused: Im sure the car will be a beast with more boost though

cause i am runnin stock fuel pump and stock fuel system that i couldn't afoard when the car finished + I am runnin lean with the stock pump at high rpm.

the car will be ready in a couple of weeks, i have invested about 2gs on fuel system now that will support my 1100+rwhp future needs.

prostock_bigblock
09-29-2007, 12:05 AM
my tuner says I am not making 2.9psi, he said around 2.5 and thats what the gauge read in the car.

My base line with LTs and a tune was 354rwhp and 366rwhp, thats a 160rwhp and about a 50rwhp with a 2.9 psi, i am really satisfied and worth every penny spent on this project.

Abdullah
09-30-2007, 03:34 AM
my tuner says I am not making 2.9psi, he said around 2.5 and thats what the gauge read in the car.

My base line with LTs and a tune was 354rwhp and 366rwhp, thats a 160rwhp and about a 50rwhp with a 2.9 psi, i am really satisfied and worth every penny spent on this project.

can you share what is your single turbo kit consists of?

nice numbers.

2MuchRiceMakesMeSick
09-30-2007, 04:38 AM
nice numbers from such low boost

prostock_bigblock
09-30-2007, 03:18 PM
can you share what is your single turbo kit consists of?

nice numbers.

u can follow the build link it has all the info
http://ls1tech.com/forums/showthrea...project+finally

Reject
09-30-2007, 03:57 PM
VEEERY nice !!

67Firebird455
10-03-2007, 01:13 AM
Dang man, that is REALLY sweet. 2.5psi and runnin those kind of numbers. Super clean looking setup too!