General Maintenance & Repairs - P1441 Code troubleshooting?

I am getting an engine light along with the code P1441 like once a week, and it usually only lasts like a day or so. I haven't found a straight forward answer on it yet. Any ideas?

P1441 is "EVAP system flow during non purge"....your light goes out but is still is a pending code I'm sure. I have no clue how to fix. Need a guy with the smoke machine to pressurize the evap system I think. Good luck

Hmm.. Ok I'll call around.. anybody else have any suggestions?

I think I heard those valves going bad is a common issue. not sure though it's never happened to me but maybe someone's got some experience onit

Hmm. I can't find much information on it. Hoping someone knows a lot about these..

P1441 EVAP Monitor Circuit High Voltage During Non-Purge G 1 F P V

All the extra stuff is just your car ID. Sounds like emissions. Ill look deeper into this and see what I can come up with. my bet it is a Valve somewhere. I threw a p1416 and I had to replace an air injector valve on bank 2. Ill see what I get.

Mike

http://gearchatter.com/si/66387.png

http://gearchatter.com/viewtopic8512.php?sid=4f26d8d22fe04ded3d81ab28b4f2 7222

Ok check these two things out also.