Aps kit arriwed
#1
On The Tree
Thread Starter
iTrader: (6)
Join Date: Sep 2006
Location: Norway
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Aps kit arriwed
Well finally it was my turn to get the Aps tt kit home, I think this kit is the first kit in Norway maybe europe
http://www.cardomain.com/member_page...86_29_full.jpg
http://www.cardomain.com/member_page...86_29_full.jpg
#5
On The Tree
Thread Starter
iTrader: (6)
Join Date: Sep 2006
Location: Norway
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
This isnt your ordinary aps tt install, its going on a 1974 to be older camaro(rebuilding the chassi now), with ls1 m6, new 9" rearaxl, full martz chassi treatment, willwood brakes just to much to list . But I have to say this is the second time this year I got loads of new parts, and I were really looking forward getting this kit and my new 9" shortend, detroit locker, 4.11, 35 spline(puh), aluminum housing hopefully by late next year the car will be finished
#7
TECH Fanatic
iTrader: (17)
This isnt your ordinary aps tt install, its going on a 1974 to be older camaro(rebuilding the chassi now), with ls1 m6, new 9" rearaxl, full martz chassi treatment, willwood brakes just to much to list . But I have to say this is the second time this year I got loads of new parts, and I were really looking forward getting this kit and my new 9" shortend, detroit locker, 4.11, 35 spline(puh), aluminum housing hopefully by late next year the car will be finished
Trending Topics
#10
On The Tree
Thread Starter
iTrader: (6)
Join Date: Sep 2006
Location: Norway
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
I got those gear's because I would rather have a more user friendly gear at the top, this is going to be a pro-touring camaro not only a drag racer, now i get to use my six gear, but with 3.42 it would have been almost useless.
#13
On The Tree
Thread Starter
iTrader: (6)
Join Date: Sep 2006
Location: Norway
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
#14
TECH Veteran
iTrader: (3)
Well keep hearing this but on the boosted lists on this forum there are many very fast cars running like 3.73s not sure how many running 4.10s. On a six speed car a bit different from autos. Autos have advantage of building boost with stall converters and manuals should get a two step. Not sure why so far dont see any antilag options in programming like have on my dsm cars. I am going most likely to 3.73 in my new rear end and not overly worried.If go auto might swap down to 3.54. I am going with strange dana 60 rear end.
#15
On The Tree
Thread Starter
iTrader: (6)
Join Date: Sep 2006
Location: Norway
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
The small turbos that APS has used in the f-body tt kit should cure this building boost (hope so), anyway 4.11 would suit an m6 better than 3.73 (hope so).
The reason I ordered 4.11 is all based on what I have read on Pro-touring.com and Lateral-g.net hopefully it will be alright.
Check it out !
http://www.cardomain.com/member_page...86_27_full.jpg
PS:This is my first turbo project :-)
The reason I ordered 4.11 is all based on what I have read on Pro-touring.com and Lateral-g.net hopefully it will be alright.
Check it out !
http://www.cardomain.com/member_page...86_27_full.jpg
PS:This is my first turbo project :-)
#16
12 Second Club
iTrader: (4)
My car has the stock 3.42's and builds boost over 2,000 rpm's with full boost around 3,500 rpms. From what I understand the lower gears load the engine up more and help build boost faster. The other day I was accelerating up a slight hill and it totally loaded the engine and boosted quickly. All of the sudden I was spinning my tires.
#18
On The Tree
Thread Starter
iTrader: (6)
Join Date: Sep 2006
Location: Norway
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Tnx peter, the tt system looks awsome and the finish is superb. I dont think the system will be put on the car before late next year, to many other things to do (need more money to:-), and I want all the new engine parts before before I start with the tt system