Eastern Members - New best 60' today.




View Full Version : New best 60' today.


Noyzee
10-14-2007, 07:54 PM
went racing today, first run on motor went 9.9 @ 136
then put the spray to it. ended up with a 1.27 60' (personal best for me, no limiter straps or bars, but ended up with this.

http://img.photobucket.com/albums/v357/Noyzee/10-14-07_2035.jpg

http://img.photobucket.com/albums/v357/Noyzee/10-14-07_2037.jpg


JL ws-6
10-14-2007, 08:06 PM
wow.... mental note, if you have a head crack, you weld it up and it cracks again, this is what's in store if you keep trying to use it! What else did it take with it when that happened... I can't imagine the engine bay's too pretty after that.

Noyzee
10-14-2007, 08:11 PM
haha, mental note make more money so i could have bought new heads. lol
it took nothing but the gasket. everything else is fine.

it cracked in 2 spots this time either was what i welded..


JL ws-6
10-14-2007, 08:14 PM
With the way that looks in the photo it's hard to see, but I assume that happened when it was running yes? I could just see fuel/coolant/etc.etc. spraying all over the place making for a big mess.

Lucky it didn't take anything else with it, because that could have been alot worse.

Scrap alum, it's geting good $ these days, apparently you have a couple chunks that are about 40 lbs a piece or so LOL.

Noyzee
10-14-2007, 08:16 PM
yes it was running, but it just sprayed a little water around, but i run water only so it cleaned right up.


yea im going to pull the springs and the valves and junk the heads.

JL ws-6
10-14-2007, 08:19 PM
good move. I see a set of ET 255's with the 6 bolt option in your future :)

Noyzee
10-14-2007, 08:25 PM
I'm already talking to Kenny about them.

98hardtopSS
10-14-2007, 08:31 PM
damn that sucks but killer 60 foot

Nautilus
10-14-2007, 08:42 PM
:jest: :jest: :jest: :jest: :jest: :jest: :jest: :jest: :jest: :jest: :jest: :jest:

If your going to break it... Do it all the way :jest:

That is badass :chug:

Noyzee
10-14-2007, 08:42 PM
know whats funny, ive been home for a couple hours and im already unloaded, car is apart, i ate dinner and im 5 beers deep. lol

Noyzee
10-14-2007, 08:43 PM
haha, timmy, i do it right bro. lol

Nautilus
10-14-2007, 08:44 PM
BTW 1.27 60' You were on your well on your way to a new best. Too bad it didn't hold up past the 1/8th... It would have made for a good 1/2 a time slip :jest:

Noyzee
10-14-2007, 08:47 PM
haha, tell me about it, my 330 was faster then my 8.9 pass as well. stupid heads

Noyzee
10-14-2007, 08:48 PM
heres todays pic. it was about a 50 foot power wheelie, car was working. i made a few adjustment this week and it worked!

http://img.photobucket.com/albums/v357/Noyzee/10-14-07_2112.jpg

Nautilus
10-14-2007, 08:51 PM
Badass picture!

Tracy wants to know if your going to have them welded so you can run them again this season? :jest:

ButtaballZ28
10-14-2007, 08:53 PM
Wow you def. broke them right :)

Noyzee
10-14-2007, 08:53 PM
Badass picture!

Tracy wants to know if your going to have them welded so you can run them again this season? :jest:

dont think i wont. lol

LT1MCSS
10-14-2007, 08:56 PM
Looks like you finally circled the problem!!! :jest::jest:

Noyzee
10-14-2007, 09:28 PM
haha mike, now thats funny.

BoostedLT5
10-14-2007, 10:03 PM
Hey Brad, i dont know if i met ya or not but your guys let me borrow a jack so i could put my et streets on. I finally got to see your car in person too unfortunatley it was right after the heads cracked and it was already parked. Good luck with it and thanks again!

Anthony

Noyzee
10-14-2007, 10:14 PM
Hey Brad, i dont know if i met ya or not but your guys let me borrow a jack so i could put my et streets on. I finally got to see your car in person too unfortunatley it was right after the heads cracked and it was already parked. Good luck with it and thanks again!

Anthony

those suns of bitches let you use my shit. lol
jk, i did not meet you, but thanks, and glad i could help.

Speedy0009
10-14-2007, 11:56 PM
those suns of bitches let you use my shit. lol
jk, i did not meet you, but thanks, and glad i could help.


Hey Brad.. I got there late and missed all your runs! Sick pic and great 60'!

I saw the car but didn't see you around and brought Anthony the ET Streets for his GTO... Can't wait to see your car run with a new set of heads!!

Once again.. Congrats! :chug:

NOYZEE2
10-15-2007, 12:02 AM
you deffinatley passed the 60 box in a wheelie haha

Jokeman
10-15-2007, 06:59 AM
Ill have those heads welded up tonite. Take em to the machinist tomorrow and you can have the car running by wednesday night! I don't foresee any issues with that:jest:

HASTINGSRJ
10-15-2007, 07:08 AM
congrats on your 60ft, that sucks about the heads though......nice pic...

Mr. B
10-15-2007, 07:29 AM
A little JB Weld and they will be as good as new! :D

I'm sure AFR *loves* seeing that pic!

http://img.photobucket.com/albums/v357/Noyzee/10-14-07_2035.jpg

DannoWS6
10-15-2007, 10:22 AM
Holy Crap, I dunno what's more badass, the 60" or ripping the head in half.

I only know this AFR/Noyzee story from what I've read here, and I don't think AFR is totally to blame, if even. However that still sucks bro, altleast you got a lot of new bests, the season is at an end, and you got a BADASS paperweight.

Durien
10-15-2007, 10:35 AM
thats a nice paper weight! and thats a hell of a 60'!!!

Noyzee
10-15-2007, 12:19 PM
i wouldnt clutter my desk with that junk. lol

i didnt start this thread to bash afr, just to show my distruction. i realy dont care to discuss afr issues here any further

PurEvl
10-15-2007, 12:52 PM
LOL that beats me tearing my k member out :jest: Awesome!

PurEvl
10-15-2007, 12:53 PM
i wouldnt clutter my desk with that junk. lol

i didnt start this thread to bash afr, just to show my distruction. i realy dont care to discuss afr issues here any further

ya...its got nothing to do with afr...those heads see alot more power then you got. Just shit luck, never know maybe bad metal in one set. Get some etps and let her rip again. I wanna see you flip it over in a wheelie. Cars going mint man

Rhode Island Red
10-15-2007, 01:06 PM
Congrats on the 1.27 60' :D I for one can't wait for the day (when I can afford it) when I go sub 2.0's. Looking like next season will be a banner year for you say consistent 8 second time slips :joecool:

Noyzee
10-15-2007, 01:25 PM
Mike, im not sure, we are pretty even with distruction. lol

not sure what it is, but i am done for this season, im going to take the other head off tonight, take the headers and exhaust down, throw a coat of wax on everything spray the motor down with some oil, and cover it up for the winter. i cant see spending all the $$ right now for 2 more weeks of racing.
sled will be out this weeks and getting torn apart. its time for some grass drags baby!!

Jokeman
10-15-2007, 01:41 PM
its time for some grass drags baby!!

Thats what Im saying buddy!!:D Lemme know when and where and the F7 will be coming out:D

Noyzee
10-15-2007, 01:47 PM
Thats what Im saying buddy!!:D Lemme know when and where and the F7 will be coming out:D

i thought you didnt want to get your pussy dirty. hehe

Jokeman
10-15-2007, 01:55 PM
i thought you didnt want to get your pussy dirty. hehe

I got a bee to squish!:D Plus Krissy wants to try it.

Mr. B
10-15-2007, 02:01 PM
i wouldnt clutter my desk with that junk. lol

i didnt start this thread to bash afr, just to show my distruction. i realy dont care to discuss afr issues here any further

I'm not telling you to bash them, but they should step up to the plate and make good on a set of heads.. it's thier logo on the cracked head.. and they should "say no to crack"..

Plus- god forbid you lose your Moderator license for "bashing".. :D

8ALTNG
10-15-2007, 02:18 PM
Damb that sucks man. Well at least you got a cool pic and story from it.

squirrel masta
10-15-2007, 02:42 PM
its a good thing you circled it an put arrows pointing to it....with out them i might not have seen what was wrong.....hahahaha

PurEvl
10-15-2007, 03:39 PM
its a good thing you circled it an put arrows pointing to it....with out them i might not have seen what was wrong.....hahahaha

:jest::jest::jest::jest:

Noyzee
10-15-2007, 03:49 PM
MR.B, i know i would have fixed the issue, but its dead with them now, no biggie, even if they gave me a new set it would not fix it for me.
no big deal, i want to get the sled going anyway.

Brian, you cant catch my bee to even try it.

she wants a doo does she. hehehe.

i may have to jet my sled and gear it for 600 feet this season for the grass just to show you what she will really do!!!

Greggggg, haha, i did it so you couldnt miss it. lol

Jokeman
10-15-2007, 04:54 PM
Brian, you cant catch my bee to even try it.

she wants a doo does she. hehehe.

i may have to jet my sled and gear it for 600 feet this season for the grass just to show you what she will really do!!!

Nah.....she's a cat girl. Yup, definitely jet that bitch and gear it for grass. I wanna see what it can do.:D

slvrhwk
10-15-2007, 05:13 PM
Congrats on the new 60' and nice pic carrying the wheels out like that.

Sucks about the head though. I thought when mine broke it was bad but yours wow!

slayer_taunu
10-15-2007, 09:55 PM
it's thier logo on the cracked head.. and they should "say no to crack"..

ouch :rotflmao: