XS HP

Hey everyone. Im building a heads+ cam car and plan to trap around the low 120's/ high teens. I am running a PT4000 stall and a MS3. I have 26x10.5x15 et streets on the back as well. My question is whether I should run 4.10's in the rear or just 3.73's. i have seen mixed opinions on this from various threads so I figured Id start my own. BTW- this is a car which wont see much street or highway use.

Thanks

DMONEY06

iTrader: (2)

if its not gonna see much highway use go 4.10s i had 4.10s they pull like a bitch, but the guy who put them in didnt do it right and i changed to 3.42s

FEF84

Dont forget about 3.90 in a 9 inch!

Sunset'01Z

iTrader: (10)

4.10's are steep and wont allow you to trap those speeds in 3rd gear. you will be shifting to OD before the finish line

+1 for 3.73's

WECIV

I would have my car in D or 3rd for drag racing...the shock on OD when ending a run is bad for the OD.

W

slowcamaro

iTrader: (3)

3:73

i had a 400 stall and booth gears...they booth trapped the same

BlackScreaminMachine

iTrader: (17)

You need a taller tire, and dont expect ever to use any power adder.