thinking im gonna be disappointed.
10-20-2007, 07:49 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (16)
Join Date: May 2005
Location: Gardner, KS
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
thinking im gonna be disappointed. Got a 98' TA here. Car has the following
-Hooker Longtubes
-Loudmouth(with flomaster 40 series in place of resonator)
-Stock rear(3.23 rear)
-Ported Fast 90
-Fast 90 Throttle body
-Vigilante 3200 stall
-Comp 224/230 .581/.592 114LSA
-Ported 241 Heads with Ferrea 2.02/1.57, Comp 918 springs, Comp 1.7 Rockers
-NX Wet Kit (150 shot)
-Competition Engineering Rear Drag shocks
-MT ET Streets 275/40/17
-No front swaybar
Just trying to see if anyone on here as a car with very similar mods, and what kind of times/trap speeds they put down. Educated guess work could be beneficial aswell.
Thanks!
-Hooker Longtubes
-Loudmouth(with flomaster 40 series in place of resonator)
-Stock rear(3.23 rear)
-Ported Fast 90
-Fast 90 Throttle body
-Vigilante 3200 stall
-Comp 224/230 .581/.592 114LSA
-Ported 241 Heads with Ferrea 2.02/1.57, Comp 918 springs, Comp 1.7 Rockers
-NX Wet Kit (150 shot)
-Competition Engineering Rear Drag shocks
-MT ET Streets 275/40/17
-No front swaybar
Just trying to see if anyone on here as a car with very similar mods, and what kind of times/trap speeds they put down. Educated guess work could be beneficial aswell.
Thanks!
10-22-2007, 02:55 AM
#4
TECH Enthusiast
Thread Starter
iTrader: (16)
Join Date: May 2005
Location: Gardner, KS
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
i was shooting for low 11's the whole time when building and saving for the setup. i just don't know if it is going to end up being what i was shooting for. hard tellin till i actually get to the track.
Trending Topics
10-25-2007, 08:10 PM
#8
TECH Fanatic
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
Buy the madman or wolfe kit, torque arm, offset lca's adjustable panhard rod. anti roll bar, drag shocks and springs front and back, cage that should do it chassis wise for much to come.
You can remove the front and rear bumpers 40 pounds total, buy after market seats, run 15" rims skinnys up front, strange front brake kit drops 50 pounds, k member and a arms, manual steering and brakes. Thats a pretty good start.
You can remove the front and rear bumpers 40 pounds total, buy after market seats, run 15" rims skinnys up front, strange front brake kit drops 50 pounds, k member and a arms, manual steering and brakes. Thats a pretty good start.
