EPP

iTrader: (22)

http://www.exoticperformanceplus.com....html?item=772

Ten more sets of LS1 F Body front mount intercoolers are ready to ship, give us a call at 260 244-4808 or place your order at the link above. Thanks. Bob

02NBMFormula

iTrader: (6)

this is an awesome intercooler, very cool iat's and it looks dead sexy

WicketMike

iTrader: (13)

on a T/A

Can you keep the foglights and the windshield washer fluid resivour with this IC ?


thanks
Mike

EspaceF1Fan

Looks identical to one in my 4banger stang

Rickys S/C Z28

iTrader: (13)

this is a nice set up i have one here in the floor!!cant wait to get it in!!

Blownramair

The foam mold which holds the foglights and front end will need to be removed and I'm not sure about the washer fluid... I had a custom "roll cage" installed for support in the front end...

Jay

WAHUSKER

iTrader: (4)

I hope one of these has my name on it.....

So would it be possible for you to make those pipes out of stainless Bob?

Mark

OreoLt1

iTrader: (11)

When installing the cooler you can actually measure and cut out the center section of the buper foam and use the ends that cover the frame rails for a little extra protection.

If you would like pics PM me as I don't want to post pics in someone else's thread.

A+ bump for a sweet deal

Jake@EPP

Currently the fogs are deleted with the kit, but we are always looking to make the kit better in every way.

02NBMFormula

iTrader: (6)

no issues with the windshield washer fluid resivour

Mike @ New Era

iTrader: (10)

This kit works very well , I have used it before and it makes a big difference in IAT's over the procharger intercooler set up !

OreoLt1

iTrader: (11)

Windshield resovoir is a tight fit but will fit

mongoose_ss

How much horsepower can it support?

Jake@EPP

We are using it in Bobs race car with about 18psi of f1a boost and not seeing a huge gain over the 1/4 . At the end of the 1/4 its around 120-125ish. This is going 146mph in the 1/4.

Avengeance

iTrader: (4)

Could one of ya guys over there give me a quote on just the piping and couplers? I already have the FMIC mounted and piping but I like that setup better. Can it be outfitted for a Vortech BPV or do I need to weld my own on? Does it include the intake "hat", looks like a tube on your setup. One more thing.. do you have to relocate the fuse box?

THANKS!

(please respond via PM if you like)

EPP

iTrader: (22)

Mark, we could easily do it out of aluminum, which is what we did for my Z28. The piping cost more, but it does looks good!
Your 90 degree elbow should be in Monday. Bob

Jake@EPP

We normally like to sell it as a kit to ensure best fit. The new brackets have moved the inter cooler about an inch forward, and the pipes have been modified accordingly.

Any bov is do-able it just takes a mild steel flange.

This is just the post procharger parts, no inlet assym.

The up-pipe goes in between the fuse box and the hole in the front frame.

WAHUSKER

iTrader: (4)

SWEET! Let me know as soon as the elbow gets in, I want the intake setup so I can start polishing & get it to my machinist to port match the heads.

And can you work me up a price & time for the FMIC w/alum piping Bob? Bling

PS I'm also going to want a set of the 1 7/8" race style Kooks....

EPP

iTrader: (22)

The elbow should be in tomorrow. I'll be at Sema all week. Please give us a call at 260 244-4808 and ask for Jake. If you would, please go over everything with Jake if you get a chance. Thanks Mark! Bob

BigBenz

iTrader: (7)

im getting mine sometime next year. Its in my plans. Very nice kit.