Going To The Track...
#1
10 Second Club
Thread Starter
Join Date: Sep 2007
Location: Aston, PA
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Going To The Track...
Hey all,
I'm going to the track Wednesday, I'm letting everyone take a shot at my times before I go, then I'll gladly post up my time slip once I return home. So, take your guesses now!
Forged 347 bottom end.
Eagle rods.
Diamond pistons. (Z06 compression.)
236/236 cam.
ET Performance 5.3 CNC'd heads.
Stock LS6 intake.
Stock TB.
Stock suspension.
Stock fuel.
RPM 6 Speed transmission.
Spec stg. 3 clutch.
McCleod master cylinder.
4.10's.
12 bolt rear.
This is my first time taking this set up to the track, and I'll be running on Nitto 55R's. This Winter it's going down for the suspension, fuel, and the nitrous. So I'm just curious to see how the car does before all of that gets thrown in the mix.
-Matt.
I'm going to the track Wednesday, I'm letting everyone take a shot at my times before I go, then I'll gladly post up my time slip once I return home. So, take your guesses now!
Forged 347 bottom end.
Eagle rods.
Diamond pistons. (Z06 compression.)
236/236 cam.
ET Performance 5.3 CNC'd heads.
Stock LS6 intake.
Stock TB.
Stock suspension.
Stock fuel.
RPM 6 Speed transmission.
Spec stg. 3 clutch.
McCleod master cylinder.
4.10's.
12 bolt rear.
This is my first time taking this set up to the track, and I'll be running on Nitto 55R's. This Winter it's going down for the suspension, fuel, and the nitrous. So I'm just curious to see how the car does before all of that gets thrown in the mix.
-Matt.
Last edited by TurboDSMJ; 10-30-2007 at 12:36 PM.