View Full Version : Nitrous check I have everything?

AR15 guy
11-01-2007, 01:00 AM
I just started gathering parts for my nitrous install.

I ordered a MSD digital window switch and a 255lph fuel pump.

Friday when I get paid I am ordering the Harris speed works wet kit. It seems pretty complete.

After that I am taking it to a local guy that supposedly does amazing work tuning GM's. I have a mail order tune (from previous owner) and I am afraid the timing is to high for a 100 shot.

So before I spray it will be dyno tuned which should help everything.

I will be getting some colder plugs to. What is the NGK number everyone recommends?

Is there anything I am missing I should look into before I start spraying? I am hoping to have everything tuned and ready by thanksgiving. I have a bunch of mustangs to stomp that weekend.

95 Z28
11-01-2007, 03:18 AM
NGK TR6's...or you can use Autolite 103's. Are you planning on running a fuel pressure safety switch? Might want to look into a blowdown tube kit if you're going to be going to the track regularly.

AR15 guy
11-01-2007, 10:45 AM
Fuel pressure safety switch wouldn't be a bad idea. Where do they actually mount? If there anyway to mount them after the fuel noid? Do if it goes bad it will not shoot the nitrous?

11-01-2007, 08:23 PM
heater and pressure switch is a must in my opinion.

11-01-2007, 09:02 PM
nitrous filter

11-02-2007, 12:24 AM
It's not absolutely necessary, but a purge kit would be nice. Most likely it wouln't be included in the kit you get.

11-02-2007, 09:34 AM
F*&k a nitrous filter and a purge! purge that shot through the motor! and the filter is a waste of money. IMO