I took the leap!
#1
TECH Resident
Thread Starter
iTrader: (2)
Join Date: Jul 2005
Location: Sparks,NV
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
I took the leap!
I took the plunge into the world of boost! I just bought a d1sc kit. Should get it by the end of next week. Any d1 guys got any tips for me. Is there anything that I should be aware of?
#7
11 Second Club
iTrader: (6)
Join Date: Jan 2005
Location: Jax, Fl
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
the crank pulley is a pain to take off. take your time. for the blower belt, get in all the way on the blower pulley and as much as you can on the crank pulley and then just turn the crank pulley with a big wrench to get the belt all the way on.
Trending Topics
#13
TECH Resident
Thread Starter
iTrader: (2)
Join Date: Jul 2005
Location: Sparks,NV
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
I was going to order from bob but, I got a deal localy that I couldnt pass up and had to take it. d1sc, 8rib, 4.5inch coolers, aluminum plenum, just a hair under 6k and they pinned my crank for free.