Ryne @ CMS

iTrader: (10)

just letting you guys know i am now a dealer for Quicktime Bellhousings. I have had a relationship with them since last year (PRI convention), where they used my stock c5 bellhousing to design there c5 scattershield.
I will have the F-body scattershield in stock in a few days. the C5 manual/c6automatic bellhousings will be in a few weeks. C6 manual i will get on an as needed basis.

F-body/ls1-t56 part numbers#
RM8020-$422.50
C5 manual/c6 auto part number#
RM6035-$422.50
C6 manual part number#
RM6034-$422.50

i saw the c5 and f-body bellhousing complete this year as sema, very nice piece and all are SFI 6.1 approved. i will have some pics here in the next few days to post up. the f-body bellhousing might also fit the gto, but i am going to try it on my gto first to make sure.

Jimmard

iTrader: (12)

Does the f-body housing require grinding down on the back of the block like it does with the Mcleod unit?

ls1 joe

iTrader: (37)

Are they going to do any LT1's. I am interested in keeping a few if they are.

Amber
Six Speeds Inc.

styoung

iTrader: (4)

x2 i have heard a lot of horror stories about the Mcloed.

JDP

iTrader: (21)

ya, im going to need one after watching taners clutch **** all down the track, i like me legs and car in one piece, just need to get the cash first.

post pics when you get them

VIPRETR2

iTrader: (63)

When I ordered one from Quick Time last Wed. they said the motor plate used with the housing was .25" aluminum, can you confirm that? I don't want something that will contain a blast and send everything through the motor. They also told me it was in stock and it wasn't so between those 2 things I cancelled the order yesterday. But I may call them back IF the motor plate is steel. Thanks,

Larry

Ryne @ CMS

iTrader: (10)

i dont know.... as of now i dont see it on the list, but i believe i have a extra LT1 bellhousing maybe i can talk to them and see its someing that would interest them.
i do not believe so.... i know i had to do that a few times with a mccleod unit.

they were in stock today, so i should see them by early next week, i will contact him a see if the motor plate is aluminum

felton316

Will it fit with SLP Longtube headers?

Torkman15

iTrader: (2)

I could use one more, what does it weigh. When you have one weigh it and tell the LS1 world.

Thanks, Tom

black01_WS6

iTrader: (13)

X2 and some pics would be nice.

ss1

iTrader: (32)

Thwy have a bunch of cool stuff on their website. Check it out at http://www.quicktimeinc.com/products.html

SuperSport4life

iTrader: (7)

Wow that looks really good! Anybody install one yet?? Post up pics and results when done!

Ryne @ CMS

iTrader: (10)

here is a pic

f-body RM-8020

Torkman15

iTrader: (2)

That motor plate looks like its aluminum, is it.?.?

Ryne @ CMS

iTrader: (10)

havent had a chance to call them, seems like it is a aluminum motor plate.

SuperSport4life

iTrader: (7)

any news ?

TINKRD

iTrader: (27)

hmm. i might jsut order this since i need a new bellhousing anyways....

forgive my ignorance, but the motorplate bolts behind the flywheel?

SuperSport4life

iTrader: (7)

anything?

CamaroRick

iTrader: (24)

any pics of the left side of the bellhousing, where the slave bleeder is at?
wish i would have known there was another option before i bought my mcleod
lots of grinding and cutting, plus it has a huge opening in the side to let the smoke out

N2O-ARMD

iTrader: (1)

Is there a cover for the starter opening? or are they just leaving it open