badass99ss

iTrader: (17)

So I picked up a P-1sc polished race kit today for $3500.00. It is a COMPLETE kit with 5000 miles on it. It has everything needed to install minus fuel pump and injectors, he also had a couple pulleys and new oil. So did I get a good deal or did I make a mistake buying a used kit?

sworaz

iTrader: (13)

I've been looking for some similar FI kits and that seems really high...but no need to worry I'll give you 3,500 for it to make up for such a bad deal
jk man, that actually seems like a really good deal especially being a complete kit.

DeltaT

iTrader: (5)

I think think that's about $600-1000 too high for a P1SC kit used. The pulleys help if you sell those you don't need. What all was in the kit? Maybe I don't understand what you got.

Jim

lmt0705

iTrader: (7)

thats not bad at all, another 5 or 6 hundo and some tuning and you should be good to go

Urban Legend

iTrader: (5)

Good to go until he starts breaking ****...

Tudds

iTrader: (4)

Same kit just sold on ebay for 4000 buy it now, so dont worry.

High Pressure

iTrader: (8)

I sold my complete polished F1 kit with 2k miles for 3500 a couple of months ago.

ChevyChad

iTrader: (50)

I bought my P1SC kit used with less than 10k on it for just under $3000 shipped. It had a 6 rib setup and also included an inline fuel pump and some 42# injectors. I consider that deal I got very good. You got a nice deal, no doubt- considering a new P1SC kit costs a lot more than what you paid. You certainly didn't get ripped off

Welcome to the dark side

98turbls1

iTrader: (17)

Don't worry about getting ripped off or paying too much... It's just modding and you didn't get shafted for sure... Some people (even on here) expect to buy a kit for $2k and that will be that... That's foolish to think like that... enjoy it and get ready to start replacing other stuff..

badass99ss

iTrader: (17)

In the long run I figured I saved around 2g's

One Bad Z

iTrader: (1)

I got my kit from a friend for 1500... had at most 2000 miles on the kit when taken off.

what are the sizes of the extra pullies do you have and is it an 8 rib or 6 rib kit?

badass99ss

iTrader: (17)

Its an 8 rib kit and he said he had pullies for 8psi and 10psi.